Can a Lippert Axle be Replaced with a Dexter Axle?
Products Featured in This Question
Question:
Hi I’m looking for a replacement axle beam only Mine is a lippert brand 93” hub face 79” spring center 6000lb Straight no spindles Wasn’t sure if you have one in stock or if dexter is interchangeable Thanks adam
asked by: Adam
0
Expert Reply:
We do have a straight Dexter axle that is very close to your Lippert one. The # 7461121 will be 95 inches from hub face to hub face and 80 inches from center of one spring seat to the center of the other. The branding of the axle typically doesn't make a difference as long as the measurements match or are very very close.
expert reply by:
Lazer S
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Grease Seal is Needed for the Dexter Trailer Axle Beam Part # 7461121
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Can Hub-Face Be Longer for Replacement Axle
- Q&A: Can Trailer Axle be Replaced With 1 Larger Hub-Face Measurement
- Q&A: Can Trailer Axle be Replaced with One that Has Longer Hub Face Length
- Video: All About the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles
- Search Results: electric trailer brake assembly
- Search Results: 25580
- Search Results: 67048
- Search Results: dexter equalizer upgrade kit
- Search Results: 10~36 seal
- Search Results: dexter suspension kits
- Search Results: dexter equalizer
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Do all 3,500 lb Trailer Axles Have the Same Bearings
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: A Closer Look at the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Video: Checking Out the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Video: The Low-Down on the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Q&A: How to Determine if 3,500 Hubs will Fit Axle Hub T3584F-EZ-8974
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube