Correct SolidStep Manual Fold-Down Steps for 28-1/4 Doorway Width

Question

Question:

My door entryway is 29.5” but the width at the flange is 28.25”, which steps do I need? From my floor to the ground is 36”.

asked by: Edward L

1

Helpful Expert Reply:

The SolidStep Manual Fold-Down Steps part # LC791574 are just what you are looking for as they fit a doorway width of 25" - 28-7/8". This model is for an entry height of 35" - 44" but there are other height options as well. The doorway width is measured from inside of the flanges.

expert reply by: Conner L

1

Answer 1

It sounds like you're asking if the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TLA9005 will work where your previous Morryde steps were. If this is what you're asking, you'll just have to take a couple of measurements to…

view full answer...

Answer 2

To measure for fit of the Lippert SolidStep, measure the entry way from right to left at the narrowest point. Generally there will be a flat metal flange that extends out 1/2" all around. This is the flange that the door closes against and keeps…

view full answer...

Answer 3

Hey Jack! I would get the MORryde StepAbove RV Steps #MR98RR. These are for an entry height of 30" and 33-1/2" which will be the best option. Looks like you have 26" wide doors so this would be the correct part for your trailer. Worst…

view full answer...

Answer 4

Hey Andrew, the Fastway e2 system part #FA92-00-0800 would be a great option for a weight distribution system and sway control for your 2022 Forest River Cherokee Alpha that has a 720 lb tongue weight. Have you used WD systems before?

view full answer...

Answer 5

Hello David, The reason it’s $1000 more is because of the whopping 0.2 cu. ft. of extra space..... just kidding! The main difference comes down to the exterior and features. The #GE48FR has a sleek glass front that gives it a glossy, modern look,…

view full answer...

Answer 6

Yes, the MORryde StepAbove RV Steps with Strut Assist like #MR85RR can use the removable mounting plate. It isn't compatible with the struts but you already plan to remove them so that won't be an issue. Assuming you have a 26-28" wide…

view full answer...

Answer 7

Hey Jim! We've had this box out recently and have taken some measurements. I can confirm that the outside length of the MORryde Locking RV Storage Box item #MR43RR is 25-3/4" without the brackets attached.

view full answer...

Correct SolidStep Manual Fold-Down Steps for 28-1/4 Doorway Width

Product Page this Question was Asked From

Continue Researching