Which Rack'Em Grass Catcher Fits Ariens IKON XD-52

Question

Question:

Do you have a grass catcher for a Ariens IKON XD-52?

asked by: Matt

1

Helpful Expert Reply:

I checked with Rack'em and the Grass Catcher part # RCMMS4 is a fit for your Ariens IKON XD-52.

expert reply by: Jameson C

1

Donna H.

4/29/2025

What connecting part do I need for the IKON 52 grass catcher?

Reply

Jameson C.

4/29/2025

@DonnaH It looks like it's the part # RB-UN but that's not a part we can get at this time.

Reply

Answer 1

We have a Rackem' catcher that will work but the RCMMS4-OBS1 is not designed for that mower. Instead you will use the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower part #RCMMS4-EXS1.

view full answer...

Answer 2

The Rack'em Multi-Mount Grass Catcher part #RCMMS4 works with any riding lawn mover where the discharge opening is even with or extends out further than the mower's rear wheel. If so, then you'd need to make a custom face plate (pretty…

view full answer...

Answer 3

When it comes to installing a grass catcher on your Ariens Ikon XD The Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel #RCMMS4 will work for you. The faceplate is sold separately #RA54FR. I attached a review video link below.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hey Jose! Did you mean a Toro GrandStand Multi Force? Do you know what kind of deck it has on it? If it has the regular deck you can use the #RCMMS4-EXS1 and if it is the Z-Cut deck the #RCMMS4-EXS1-TORO. Also, your mower's discharge opening must…

view full answer...

Answer 10

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

view full answer...

Answer 11

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1. The Z deck has notches or slots in it as…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Which Rack'Em Grass Catcher Fits Ariens IKON XD-52

Product Page this Question was Asked From

Continue Researching