Fishing Pole Holder and Crossbars for 2016 Toyota 4Runner

Question

Question:

Hi, Im considering this fishing pole holder https://www.etrailer.com/Fishing-Rod-Holders/Rhino-Rack/RR576F.html?feed=npnandgclid=EAIaIQobChMI9Ibvgc-87QIVBbGGCh0eeAI7EAQYASABEgL9HvD_BwE Does it require cross bars? I think my husbands 4Runner only has the side rails at the top, with nothing across the roof. Would I need this item to make this work?https://www.etrailer.com/p-C18118.html?hhyear=2016andhhmake=Toyotaandhhmodel=4Runner

asked by: Sarah B

0

Expert Reply:

Yes and yes! The Rhino-Rack Fishing Rod Carrier # RR576F needs cross bars to clamp onto. An interesting thing about this one is that it is also the Rhino-Rack Ski and Snowboard Carrier # RR576. We have people that use this for both purposes for different seasons.

As for crossbars, the Curt Roof Rack for Raised Rails # C18118 is a great option. The best thing about these rails are that the cross bars are 2-1/8" wide x 7/8" tall. The Rhino-Rack Carrier # RR576F clamps around crossbars that are 3-3/4" wide x 7/8" tall at the most, so that means these two are a fit!

expert reply by: Evangeline M

0

Sarah B.

12/8/2020

Hi, Im considering this fishing pole holder https://www.etrailer.com/Fishing-Rod-Holders/Rhino-Rack/RR576F.html?feed=npnandgclid=EAIaIQobChMI9Ibvgc-87QIVBbGGCh0eeAI7EAQYASABEgL9HvD_BwE Does it require cross bars? I think my husbands 4Runner only has the side rails at the top, with nothing across the roof. Would I need this item to make this work?https://www.etrailer.com/p-C18118.html?hhyear=2016andhhmake=Toyotaandhhmodel=4Runner

Reply

Evangeline M.

12/8/2020

As for the hitch-mounted fishing rod holder, we don't stock any of those here at etrailer. They are very cool looking though. If you still have yours, we do sell front trailer hitches for your 2016 Toyota 4Runner. It depends on what trim-level you have. For SR5, Trail Edition, and TRD models, we have the Draw-Tite front receiver # 65074. For the Limited Edition, we have the Curt Hitch # C31054. For SR5 and Trail Edition, we have Curt Hitch # C31076. These come with install instructions and you can watch the install videos. I found that those help with getting the most accurate quote from your local dealer. I attached some videos below that you might want to check out!

Reply

Answer 1

According to my contact in the engineering department at Curt, the two front receiver fits for the 2013 Toyota 4Runner are the #C31054 for limited or SR5 models and the #31367 for the Trail models. Curt tells me that due to differences at the front…

view full answer...

Answer 2

The Curt #31367 front mounted hitch fit 2007-2014 Toyota 4Runner Tail Edition models. For the 2016 SR5 model, you'll want to use part #C31076.

view full answer...

Answer 3

As long as the fully loaded and ready to tow weight of the trailer is less than the 4700 lb towing capacity of your 4Runner, you can tow the trailer as long as the factory installed hitch has sufficient capacity. The hitch should have a ratings…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hell Tyler, Not silly at all, an I am glad you wrote in. The Malone Runway HM2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #MPG2149 has a weight capacity of 33 pounds per bike, so it will not work for you. Instead you will…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Fishing Pole Holder and Crossbars for 2016 Toyota 4Runner

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching