HappiJac Swing Out Bracket for my Dually.

Question

Question:

there are 2 brackets 182496 and 382819 HD what is the difference between the two perhaps a little wider for the HD? Do you offer the HD bracket, if so what is the price? Your time is appreciated, thank you.

asked by: Gary G

1

Helpful Expert Reply:

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks part # LC182496 is the way to go as the 382819 HD are no longer produced. From what I've gathered they were the same width but had a stronger build for heavier campers. They are no longer made because there was little performance difference.

expert reply by: Randy B

1

Answer 1

Hey Michael, yes you can attach a second set of the extender brackets part #HJ54FR to the Swing Out Extension Brackets part #LC182496 that you asked about.

view full answer...

Answer 2

From the pivot bolt to the jack bracket on the Swing Out #LC182496 there is a distance of just about 4-1/2"

view full answer...

Answer 3

Yes the Happijac swing out bracket kit part #LC182496 does work with your camper with a set of Happjac truck camper jacks and would also work/be needed for your 2021 Ram truck that is a dually.

view full answer...

Answer 4

Truck campers are certainly a cool, niche way to go rv'ing, and I can understand why you'd want some additional clearance getting past that wheel well on your dually Ford F-350 to make the experience even more enjoyable. The #LC182496 hinge…

view full answer...

Answer 5

We have a Swing Out Extension #LC182496 as well as an Extender #HJ54FR to help your camper pass the sides of your truck with the dual wheels. The swing out extensions add 3-1/2" to 4-1/2" of length depending on your mounting brackets and…

view full answer...

Answer 6

Hello Christy. I do have a potential option for you, but the Brophy Heavy Duty Cable Camper Jacks #CX74 are generally not recommended for dually trucks. Fitment can depend on the width of the truck compared to the width of the camper. In most cases,…

view full answer...

Answer 7

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks - Qty 2 #LC182496 will have 3.5 inches up to 4.5 inches depending on your camper brackets. This will be per side. Based on your photos it looks like you'll get about 3.5 inches per…

view full answer...

Answer 8

I recommend using the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems item #LC182496 and the HappiJac Fixed Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR. The fixed extenders are only 5" wide apiece.…

view full answer...

Answer 9

I contacted the Rep at Happijac to inquire on your question of the HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks, #HJ54FR. His response was that yes, you can "stack" the extensions. There is however a point…

view full answer...

Answer 10

Most likely some of the colors of the wires in your picture would match up to the #H20046 your best option would be to take a jumper wire from a 12 volt vehicle battery and put voltage on each wire to determine it's function and then wire…

view full answer...

Answer 11

The Swing Out Extension Brackets #LC182496 are designed for use with the HappiJac Truck Camper Jack Systems #LC736514-4, #LC736514-ELKIT, #LC736515-4, and #LC736515-ELKIT. If you have one of these kits on your 2006 Lance 951, then you can definitely…

view full answer...

Answer 12

The part 182496 is listed on our site as part #LC182496. It is the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems, and it does in fact come in a set of two. I've linked to a video review of these extension brackets for you.

view full answer...

HappiJac Swing Out Bracket for my Dually.

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching