Bargman Fifth Wheel and Gooseneck Wiring Harness Installation - 2017 Ford F-350 Super Duty Video

Yes, the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches part #RP87FR is a confirmed fit for a 2019 Ford F-250. It is the same system that is installed from the factory on models with the OEM prep package. It will…

The Reese #RP87FR Elite Series Under-Bed rail kit has the same exact puck spacing as the Ford OEM puck system. Since the Curt Q24, part #C16530-16020 is designed for the Ford OEM pucks, the hitch will work perfectly with the Curt Q24 slider hitch you…

Yes, the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches, #RP87FR is the same as the OEM installed puck systems; Reese is the Ford supplier. Please note the linked product review video.

I checked with Reese and for your 2019 Ford F-350 short bed you just need the Under-Bed Rail and Installation Kit #RP87FR. This is confirmed to fit your truck and will provide you with the pucks needed to mount your existing Reese Elite 18K Sliding…

Everything is included to mount the Under-Bed Rail and Installation Kit #RP87FR to your 2017 Ford F-350. The Only additional item you may need is the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch…

The factory prep package can be added to a 2017 Ford F-350 using the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches part #RP87FR. It's the same system that would have come from the factory.

I went out to the warehouse and measured the single unit #TL11001 of the Pin Locks #TLS9500 that you referenced and found the width to be 1-7/16" but to the rubber grommet measured 1-1/4". If you need 1-1/8" of space then these will…

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Auto Latch - Lippert 1621/1621 HD - 25K Item #GY66FR is designed to replace Lippert 1116, 1621, 1621 HD, 1716, Fabex 665, and M&M 665 5th-wheel pin boxes. As long as your pin box on…

You are correct. The difference between part #TLF2014 and part #TLF2014A is the constructions. The #TLF2014 is constructed of powder-coated steel and includes the hardware. Part #TLF2014A is made of aircraft-grade aluminum and has a powder-coated…

The steel Torklift camper tie downs that fit your 2018 Ford F-350 long bed part #TLF2021 and #TLF3008 weighs 74 lbs total whereas the aluminum version part numbers #TLF2021A and #TLF3008A weigh 66 lbs so it's about 8 lb lighter.

Of the two part numbers you mentioned only the #TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type #TLF2022 which is the non-aluminum/stainless steel option…

To connect to the plug on your 2019 Ford F-250's truck bed camper, what you will do is use a 5th wheel/gooseneck wiring harness. The best location really depends on the camper, but most find positioning the harness towards the rear of the bed…