Correct Replacement for Atwood 71119 Landing Gear Motor

Question

Question:

We have a 2002 Coachman chaparral 5th wheel. The front lift system will not let us jack it up or down. Attached is a picture of the part that we believe is the problem. We are fortunate that it happened to us at home. Is there a replacement part for this and if purchased and it does not work for us would it be returnable with a full refund?

asked by: Cathy C

0

Expert Reply:

We do have the correct replacement for your Atwood 71119 landing gear motor, which is what is shown in your photo. The replacement part is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893.

I have added a link to a video review as well as our return policy for you to check out.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp item #PD4135K is the replacement for the Magnetek 6300 Q series RV converter. It comes with the front cover. The AC breakers and DC fuse…

view full answer...

Answer 2

Hey Ron, the Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V. It being rated a couple amps higher will not be an…

view full answer...

Answer 3

Hi Jeff, We do have an option for you to replace your Magnetek 6300 Model 6332 converter, from Progressive Dynamics: - Replacement Section for AC/DC Power Distribution Panel - 35 Amp #PD4635V You will be able to use your current setup regarding…

view full answer...

Answer 4

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 5

The composite gearbox, part #75054SP is designed for use with standard, heavy, and super duty landing gears. The replacement gearbox, part #LG-179015 has been used by several customers and they say it is a great fit. This gearbox is made of aluminum…

view full answer...

Answer 6

Your Dometic Sunchaser Model 834EH15.401 is 15' x 8' so to replace your fabric I recommend the following: - Replacement 15'1" Fabric for 16' RV AwningSand Fade w/White Weatherstrip #LCV000334399 This fabric is compatible with…

view full answer...

Answer 7

We have found that for your Atwood model 71119 jack the correct replacement motor is the Lippert #LC141893. This particular motor is used for many applications including tongue jacks like what you have and 5th wheel landing gear systems. If your…

view full answer...

Answer 8

Trailer axle nuts don't have a torque rating as you don't want to run them down super tight. The trick is to tighten the nut till there's no play in the hub in and out with the wheel installed and then use the cotter pin to hold the nut…

view full answer...

Answer 9

There is no specific torque rating when reinstalling the castle nut after packing the bearings. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can…

view full answer...

Answer 10

The only way will be to replace the entire assembly as the rear back plate is not available by itself. For that you'd need the part #RVSTLB61. The great news is that the price for this is very reasonable and you get an all new assembly.

view full answer...

Answer 11

Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…

view full answer...

Answer 12

The correct replacement motor for your landing jack is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. The Atwood brand was discontinued and bought by a couple companies for their product lines. Lippert absorbed…

view full answer...

Correct Replacement for Atwood 71119 Landing Gear Motor

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching