Using a Backing Plate for D-Ring Placement on a Trailer
Published 07/07/2009 >
Question:
I puchased d ring from u on line we are installing them ourselfs on a trailer do i need the bottom [lat or can we use washers 2 does it need to go into the fram or next to it
asked by: valereie
Expert Reply:
The backing plate BP05 will definitely make for a stronger tie down point, especially if you are not able to bolt the tie down ring to the trailer frame. If you can mount the ring through the frame at all four points, then you would not need a backing plate for installation. If you use washers and do not mount through the frame of the trailer, you must be aware that the installation will not handle as large a load, due to the reduced mounting surface.

Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Recessed Mount
- Brophy
more information >
Continue Researching
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range E
- Shop: Loadstar K399 Bias Trailer Tire - 215/60-8 - Load Range D
- Video: In-Depth Review of the Brophy D-Ring Tie Down Anchor
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
- Search Results: trailer lift kits
- Search Results: trailer ramp lift assist
- Video: Feature Breakdown: Demco LED Light Bar for Towed Vehicles w/ Wireless Transmitter
- Shop: Demco LED Tow Light Bar for Towed Vehicles w/ Wireless Transmitter - 12V Power
- Shop: Loadstar K399 Bias Trailer Tire - 215/60-8 - Load Range C
- Q&A: Is Backing Plate Required When Installing the Brophy D-Ring Tie Down Anchor # RR05
- Q&A: Mounting Hole Spacing For Square D-Ring Tie-Down Anchor ABS69FR
- Q&A: Recommended Backing Plate for the Square D-Ring Tie-Down Anchor ABS69FR
- Q&A: What Size Hole Saw Is Needed To Install Square D-Ring Tie-Down Anchor ABS69FR To Floor?
- Q&A: Recommended D-Ring Tie-Down Anchor For With An Endless Loop
- Q&A: Will Weigh Safe WD Hitch WS79VR Work For Flagstaff Microlite 21DS Travel Trailer?
- Q&A: Can Weight Distribution System Be Used On 2007 Toyota FJ Cruiser With OEM Hitch?