Grease Seal for 3,500 Lb Axle With 2.325 Inch Outer Diameter
Updated 08/19/2019 | Published 08/17/2019
Products Featured in This Question
Question:
92 javelin bass boat trailer. Inner bearing is a l68149 outer bearing is l44649. Od of the seal is 2.325 what seal do I need? The seals that match to the l68149 are too big in the od.
asked by: Joe
Expert Reply:
I do have an option for you but it sounds like you have a very odd grease seal as the grease seal most commonly used with the L68149 and L44649 bearings is a 58846 which measures 1.719" inner diameter x 2.565" outer diameter. Unfortunately, we do not have any grease seals with a 1.719" inner diameter x 2.325" outer diameter so your best option is a new hub, the Trailer Hub Assembly part # AKIHUB-545-35-G-K or part # AKHD-545-35-G-EZ-K.
Product Page this Question was Asked From
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Review of the Hydraulic Trailer Brake Kit
- Shop: Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2
- Shop: 7-Pole Blade to 5-Pole Flat Connector Wired Trailer Adapter - Coiled Cable - 94-1/2" Long
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 10-10 Grease or Oil Double-Lip Seals - Qty 2
- Q&A: What Is Included With The DeeMaxx Disc Brake Kit DE42FR?
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Replacement Brake Assemblies for Trailer with 10-1/4 inch Drums
- Q&A: Replacing Slipper Springs With Double-Eye Springs
- Q&A: What Information Is Needed To Determine The Correct Hubs And Rotors For A Trailer?
- Q&A: Hub/Drum and Brake Assemblies that Fit Trailer Spindle Dimensions of 1.06 and 1.36 inch
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Raise Your Travel Trailer Height
- Article: Is It Illegal to Leave My Hitch on My Truck?