Dimensions of Channel Tongue Trailer Couplers for 2 Inch Frame

Published 07/06/2019

Products Featured in This Question

Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs

(804)

$39.36

Fulton Fas-Lok Coupler, 2" Ball, 2" Channel - 3,500 lbs

(371)

$31.51

Question:

Thanks for our quick answer, unfortunately it sees that the mounting holes are to low on the coupler to directly replace my old Fulton. Can you provide the same dimensions for your Item # F222000301?

asked by: Earl D

Helpful Expert Reply:

Between the bolt holes of coupler # CT-3001-Z I measured the same 3-1/16 inch. They're also 1/2 inch holes like yours. From the top to the center of the holes I measured about 1-5/16 to maybe even 1-3/8 inches. With that being said measuring from inside the coupler's channel from the top to the center of the bolt hole makes more sense. If the metal of the new one is thicker than the old one it'll still fit exactly the same even with the outside measurement being different. So I measured on the inside and got right at 1-3/16 inches. So if you measure from the top of your trailer's tongue, not counting the bolted on coupler, the center of the bolt holes and come up with 1-3/16 inches you have a match.

expert reply by: Charles S

click to enlarge

Earl D.

1/1/0001

Thanks for our quick answer, unfortunately it sees that the mounting holes are to low on the coupler to directly replace my old Fulton. Can you provide the same dimensions for your Item # F222000301?

Charles S.

7/6/2019

Absolutely. I took the same measurements on the Fulton # F222000301 and I think it'll work for you. The bolt hole distance matches. From the top to the bolt hole centers is right at 1-1/8 or 1-3/16 inches on the outside and about 15/16 of an inch on the inside.