Replacement Atwood 75722 Motor for Atwood Camper Jack

Updated 06/05/2024 | Published 06/07/2019

Products Featured in This Question

Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs

(141)

$154.10

Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies

(239)

$66.70

Question:

I have Atwood electric 75722 motor with cloche control on my 2006 lance 1055slide in camper with Atwood remote control. I saw that you have a substitution motor with cloche part Numbers # LG 142178 do this will fit on my Atwood jack with my remote control.

asked by: Luc B

Helpful Expert Reply:

We have found that the Replacement Motor # LG-142178 that you referenced is indeed compatible as a replacement for your existing Atwood 75722 motor.The only thing I recommend doing is verifying that the legs on your motor aren't flush with the housing and that they are spaced apart by 4-1/8 inches, on center. This will work just fine with the remote control.

If you happen to also need a replacement gearbox the Lippert # LC276602 will work perfectly.

expert reply by: Chris R

Keith

6/5/2024

Hey Chris I am trying to find the plastic cover bottom half for my trailer jack on my 2012 Lance the only thing I have is it's an Atwood motor 75722

Chris R.

6/5/2024

@Keith Hey Keith, unfortunately that's probably going to be tough to find because Atwood doesn't make these anymore. You might get lucky with a reseller online, but it's not something we have available. If it's needed for operation, your best bet is probably going to be a whole new jack.