Replacement Double Entry Step Motor for 2013 Tiffin Phaeton Motorhome

Question

Question:

I have a 2013 I Tiffin phaeton motorhome I need a new step motor I have a double step which is the right one to order

asked by: Donald Q

0

Expert Reply:

The Replacement Motor for Lippert Electric Coach Step # LC301695 is what you need for your double steps. Your coach will use the coach steps with the large gear instead of the gear box with a rotating arm, so this is the correct motor for that application. When removing the old motor, you will want to make sure you use the same spacers if they are present.

expert reply by: Jason S

0

Answer 1

If your RV steps are making a noise and then they won't retract without some help then you definitely need to replace the motor. For your LCI 336043 the direct replacement is #LC379147. Should you continue to hear a clicking noise then we may…

view full answer...

Answer 2

The Lippert #LC379147 is indeed the replacement motor for the 366043 that you mentioned.

view full answer...

Answer 3

I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part #LC22UD…

view full answer...

Answer 4

I spoke to my contact at Lippert Components (LCI) and they informed me that the Lippert Components Kwikee Revolution Step Control Module part #LC363980 is the correct replacement model for your Lippert Components Kwikee Revolution Steps pn…

view full answer...

Answer 5

The purple wire from the Lippert Components Kwikee Revolution Step Control Module #LC363980 is actually an optional wire that can be connected to a porch light so the light goes on whenever the steps are extended. The wire does not need to be…

view full answer...

Answer 6

Since you have a Kwikee Series 25 step the motor replacement you need is the Lippert Components Kwikee Step Motor for 25 Series #LC369506. Just the gear is not available by itself.

view full answer...

Answer 7

When installing the new replacement motor, part #LC301695, it is best to have the steps extended. With the steps extended it will give you more room to work with for the installation.

view full answer...

Answer 8

I will be happy to help explain how to remove the old motor and install the new one #LC301695. The motor and gear assembly can be replaced by first disconnecting the two pin connector from the module to the motor. Next, remove the p-clamp holding the…

view full answer...

Answer 9

I spoke with my contact at Lippert Components who said that it sounds like you just need a new motor #LC301695. He said that when you are getting that chatter noise while it is trying to operate that it means the motor is going out and needs to be…

view full answer...

Answer 10

I spoke with my contact at Lippert about the issue you are having with your Coach Steps. They stated that this is likely a result of the motor not "amping out" rather than a faulty control module. When the step is fully retracted, the motor…

view full answer...

Answer 11

I spoke to my contact at Lippert about installing the Replacement Motor for Lippert Electric Coach Step part #LC301695 and they informed me that you will need to do so while the step is fully extended out. If you take a look at the top of the gear…

view full answer...

Answer 12

The motor and gear of the Replacement Motor for Lippert Electric Coach Step #LC301695 does not have a limited range in the direction it operates. Basically what I mean by that is that it does not require you to install it with either the steps out or…

view full answer...

Replacement Double Entry Step Motor for 2013 Tiffin Phaeton Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching