Picking Out Replacement Roof Vent Lid for Ventline: AS-13 M VA446-1

Question

Question:

Hi, The part i need to replace reads: Ventline: AS-13 M VA446-1 ANS. Z26.1 DOT.364 REPLACEMENT NO. VA530 Can you please help me? Thank you,

asked by: Karen S

0

Expert Reply:

Thank you for providing the replacement vent lid part number VA530. This was indeed once a valid part that is now obsolete, but we can still help you select a replacement vent lid.

Please refer to the linked photo showing the different hinge styles on the replacement lids we offer. We have 3-point, 4-point and continuous hinge type replacement lids. Just match up your hinge type and then on the linked page click on the filters to choose your hinge type and preferred lid color.

For example, for a rounded white dome-style lid with continuous hinge you can use part # BV0554-01.

expert reply by: Jameson C

0

click to enlarge

Steve K.

11/3/2021

Is there a motorized version I can retrofit? I would wire a operation switch to it. 12 VDC if necessary, but a AC motor would be my preference.

Reply

Les D.

11/4/2021

All of our replacment ceiling fans run on 12 volts DC. I have attached a link to these fans for you to review and choose from.

Helpful Links

dept-pg-rv_vents_and_fans-sf-roof_vent-pc-with_12v_fan.aspx

Reply

Answer 1

Hey Henry, Yep, it sure will; a ST225/75R15 trailer tire measures 28 inches in diameter so you can definitely use the etrailer 27"-29" Spare Tire Cover #e67VV. All you have to do is place the cover over the tire and the elastic opening will…

view full answer...

Answer 2

We currently only offer the Replacement Dome Lid for Ventline E-Z Lift Ventadome trailer roof vents in white #BVE0108-00 or black #BVE0108-03.

view full answer...

Answer 3

The correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well as an installation video to assist.

view full answer...

Answer 4

You would need the standard MaxxAir Vent Cover part #MA00-933069 as a vent cover for the top of your Ventline E-Z Lift Ventadome #V3094-603-00C.

view full answer...

Answer 5

I spoke with my contact at Ventline and she stated that if you have a newer EZ Lift Ventadome, the correct replacement lid will be part #BVE0108-03. This smoke color lid features a plastic hinge with four mounting points. You can compare the hinge…

view full answer...

Answer 6

Since you have a Ventline V2394 the correct screen/frame you'd need is the part #BVC0573-31R.

view full answer...

Answer 7

I went out to our warehouse and measured the switch knockout on the Replacement Screen Frame with Screen #BVC0573-41 for you. The knockout is 3/4 inch by 1/2 inch as you assumed. If you want the switch integrated then use #BVC0573-41R in polar white…

view full answer...

Answer 8

Email me back with the picture of your vent lid and I'll be able to tell what you'd need. We do have the Ventadome style lid in white with the part #BVD0449-A01 which is a very popular design so most likely it is what you need.

view full answer...

Answer 9

First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out…

view full answer...

Picking Out Replacement Roof Vent Lid for Ventline: AS-13 M VA446-1

Product Page this Question was Asked From

Continue Researching