Recommended Replacement Axle for 2002 Coleman Westlake Pop-Up Camper with Lifted Ground Clearance
Question:
Hello, I have a 2002 Coleman Westlake pop up camper. I want to do the axle flip to get additional ground clearance and higher ride height. I know you sell kits to accomplish this. What I really want is to purchase a new axle with electric brakes and the leaf spring supports already welded on top so I can just install it when it arrives. Can you offer this product or modify an existing assembly prior to shipping it to me? Thanks!
asked by: Ryan T
Expert Reply:
We do not have the thru-axles with the flipped leaf spring mounts already attached. My recommendation is to use the Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs # e43SR if your spring centers are 74 inches and then use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00.
If you have different spring dimensions then I instead recommend the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR3500S06 which will give you the height you desire and will replace your leaf spring system. This will require a 2 inch square tube (not included) for the integrated holes that is cut to your custom length. Then you can add the brake assemblies # AKEBRK-35-SA and hubs # AKHD-655-35-EZ-K.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: How to Raise Your Travel Trailer Height
- Q&A: Over-Under Kit, Shocks, and Upgraded Equalizer for Toy Hauler
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What Parts do I Need to Flip My Axles on My 2021 Grey Wolf 26dbh?
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How to Increase Trailer Ground Clearance Using an Axle Over-Under Kit
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Suspension Lift Kit for Forest River Wildwood X-Lite 273QBXL and Storage Cover
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Q&A: Difference Between 30205 and L44643 Bearings
- Q&A: Is There An Axle Flip Kit for a 2,000 Lb 1-3/4 Inch Diameter Axle