Dimension Needed to Determine if HitchMate TruckStep XL # HE4037 Will Clear Spare

Question

Question:

How far down from the hitch pin hole is the top of the extension bar? I need to clear my spare tire underneath my 2017 Ford Expedition. Thanks,

asked by: Dale K

0

Expert Reply:

If you measure from the center of your hitch pin hole down 4-1/2 inches that will be where the top of the bar would be. So if your spare is less than 4-1/2 inches from the center of the hitch pin down this would fit around it easily.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The HitchMate TruckStep Extendable, Hitch Mounted Step, #HE4045 fits most vehicles but you will want to take some measurements to be certain it fits your 2020 Ford Expedition Max Platinum. First measure from the center of the hitch pin hole to the…

view full answer...

Answer 2

For your bed step, I recommend the HitchMate TruckStep Extendable, Hitch Mounted Step for 2" Hitches - 9" x 6" - 500 lbs #HE4045. This mounts into your trailer hitch receiver and gives you an adjustable step to use when the tail gate…

view full answer...

Answer 3

Although a step like the #B75300 Bestop TrekStep isn't available for the Tundra, we do have options that would work great for you. If you don't mind stepping over the tailgate, you can use a Hitch Mounted Step like part #CARR183252. The step…

view full answer...

Answer 4

When the HitchMate TruckStep XL part #HE4037 is extended all the way out and folded down it measures 26 inches. So it would stick out 6 inches past your tailgate.

view full answer...

Answer 5

The difference between HitchMate TruckSteps, parts #HE4045 and #HE4037 is that the latter is the XL version which has a larger step pad and extends 2 more inches than the standard version. The #HE4045 measures 9-1/4 by 5-1/2 inches and the #HE4037…

view full answer...

Answer 6

From the center of the hitch pin hole to the furthest edge of the HitchMate TruckStep #HE4045 is about 20-1/2". If you need more room than that we have the XL version as part #HE4037 which measures 29-1/2" from the center of the hitch pin…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Bill! Pressure won't be a problem with the ClearVU Backup Camera Cleaner System #CV64FR. This will easily be able to clean your rear camera. Also, it comes with 25' of tubing so routing it the way you described won't be an issue as…

view full answer...

Dimension Needed to Determine if HitchMate TruckStep XL # HE4037 Will Clear Spare

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching