Wire Color Chart Diagram for Installing Hopkins Multi-Tow 7-Way Blade and 4-Way # HM11141144

Question

Question:

Jameson, the white ground wire that is attached to HM1114114 plug is screwed on truck, right!, so what white wire is connected to the black wire on the truck, according to color chart, white wire connects to black wire? Theres only one white wire. Also, for reference, what happens if bare orange wire touch metal of truck? Appreciate your imput!

asked by: Wilfred N

1

Helpful Expert Reply:

I attached a diagram that shows how to match all of the wire colors of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144 to the wire colors on your 2017 GMC Canyon.

expert reply by: Jameson C

1

click to enlarge

Wilfred N.

10/2/2018

Jameson, the white ground wire that is attached to HM1114114 plug is screwed on truck, right!, so what white wire is connected to the black wire on the truck, according to color chart, white wire connects to black wire? Theres only one white wire. Also, for reference, what happens if bare orange wire touch metal of truck? Appreciate your imput!

Reply

Jameson C.

10/2/2018

The white wire of the # HM11141144 is the ground wire for the harness and the black wire of your truck would be the ground so those two need to be connected. Or you can run the white wire of the harness to a clean metal surface on the truck frame as that will ground the harness as well. Since the orange wire of your truck is the 12 volt accessory circuit it will spark if you touch it to the metal of your truck. The fuse related to this circuit will most likely pop too.

Reply

Michael R.

8/9/2020

Please, on 2016 dodge ram 3500 6.5l I need to identify trailer wiring diagram or what color is ground , postive 12v. ect. please give me and answer.

Reply

Jon G.

8/19/2020

I'm not quite sure what color OEM wires are for which trailer functions on your 2016 Ram 3500 but I can help you out in regards to where each function should be located on your 7-Way socket. You're going to need to test each wire as you run through the functions to determine which wires carry which functions. Here is a link to our helpful article about 7-Way wiring that you can check out.

Helpful Links

faq-wiring-7-way.aspx

Reply

Randy

11/14/2021

Need wiring diagram for factory 02 ford F-250 7 blade hopkins

Reply

Victoria B.

11/18/2021

@Randy Unfortunately I don't have a chart like this one that corresponds with the wiring colors on your 2002 F-250. Since wiring colors could change over production or in the time since manufacturing if customization or repairs were made, testing the wires for function is always the safest bet.

Reply

Answer 1

There are two color code standards that are used in the trailer world. The Hopkins 7-Way RV style connector and cable, #H20046, that you referenced uses the RV Industry standard color code which is as follows: White Wire - Ground Red Wire - Left…

view full answer...

Answer 2

You are correct. Even though the 16K B&W Patriot #BWRVK3200 is a great option, if the GVWR of your 5th wheel Montana 3120RL is 16,385 you do want to give yourself a safety margin. We typically recommend having at least 1,000 lbs - 2,000 lbs of…

view full answer...

Answer 3

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 4

You'll need a 20 amp circuit breaker for the brake controller power and a 40 amp circuit breaker for the battery charge line circuit from the trailer connector for a total of two. We actually offer a kit with these circuit breakers as well as the…

view full answer...

Answer 5

It's a wire color difference but not a function difference on the pins of the 7-way. The difference comes from the fact that the two different styles are representative of two different areas that uses trailers. Traditional is usually seen on…

view full answer...

Answer 6

I spoke with my contact at Curt and he said if you have installed the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C55515, you will not need to do anything with the fuses to enable the trailer…

view full answer...

Answer 7

You do not need to order the part #LC84PJ with the Lippert lift kit part #RR23QX as that's just a replacement part that comes with the kit.

view full answer...

Answer 8

For your 12V RV heater replacement, I recommend the Rampage Radiant Backseat Heater - 300 Watt - 12 Volt #RA3501. This heater has and integrated swivel mount and is 8 inches tall x 7 inches wide x 6 inches deep. I've attached a video to assist.

view full answer...

Answer 9

In order to prevent the steering wheel in your 2017 Chevy Sonic from locking up when flat towing it behind your RV, you will just need to make sure to follow the steps in the vehicle's owner's manual, specifically the proper key position. I…

view full answer...

Answer 10

A brake controller is going to need to be hardwired into your 2002 Holiday Rambler Endeavor because there is no plug available. In order to do this (since I assume it already has a 6-pin wiring harness in the back) you will need to cut that and…

view full answer...

Answer 11

The Draw-Tite trailer hitch receiver part #75699, does have a cleaner look than either of the two that fit the Diesel models; parts #C13182 and #75713. However, the #75699 doesn't fit the Diesel models because the DEF tank interferes with the…

view full answer...

Answer 12

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Wire Color Chart Diagram for Installing Hopkins Multi-Tow 7-Way Blade and 4-Way # HM11141144

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching