Recommended Bearing Kit for 1995 Ravens Trailer with 3,500 Pound Axle

Updated 07/05/2018 | Published 07/04/2018

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2661)

$15.94

Replacement Trailer Hub Bearing - L44649

(1995)

$19.81

Replacement Trailer Hub Bearing - L68149

(1995)

$16.11

Question:

Hi Folks, I have a 1995 Ravens 5x8foot aluminum utility trailer with a 3500# torsion axle. I want to replace the bearings, races and seals but need to know what the correct bearing kit would be. Can you help? Thanks ever so much,

asked by: PJ

Helpful Expert Reply:

Most likely your 1995 Ravens Utility Trailer that has a 3,500 pound axle uses # L68149 for the inner bearing and # L44649 for the outer bearing. You can pull one of your hubs to confirm this by simply checking for the numbers that should be stamped inside the bearings themselves. You can also measure the spindle at various locations where the bearings sit if you are unable to read the numbers.

For a complete bearing kit that includes these bearings, the 10-19 grease seal (1.719 inch inner diameter, 2.565 inch outer diameter), races, cotter pin, and tang washer, you will use the Bearing Kit # BK2-100.

expert reply by: Chris R