How Does Brake Controller Install in 2017/2018 Dodge Durango with Factory 7-Way

Products Featured in This Question

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers

(63)

$23.36

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6365)

$146.94

Question:

Thank you so much for the information. I’m assuming the connection point is behind the hush panel beneath the dash. I’m so glad I found your online advice.

asked by: Dave

Expert Reply:

I wasn't sure if you meant 2017 or 2018 Dodge Durango but the good news the fit info applies to both of them. Since you have a factory 7-way at the rear of your vehicle all you need to install a brake controller is the correct install harness part # TK93VR which plugs into a port under the dash.

For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

expert reply by: Jameson C

click to enlarge

Dave

5/4/2018

Thank you so much for the information. I’m assuming the connection point is behind the hush panel beneath the dash. I’m so glad I found your online advice.