Hardwiring a Trailer Connector on a 1997 Dodge Ram to Power Trailer Lights and Brakes

Products Featured in This Question

Hook Probe Circuit Tester

(56)

$11.88

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(270)

$31.23

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6390)

$171.94

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3272)

$124.38

Question:

Cant figure out how to get a 4 flat hook up to my Dodge Ram 1997 1500 just from a hardwired into the wires how do I get the brakes to work

asked by: James L

Expert Reply:

To hardwire a 4-way you'll need to use a circuit tester, like part # PTW2993, to find the correct wires on your truck by function. One the 4-way you have picture the color code is white for ground, green for right turn and right brake lights, yellow for left turn and left brake lights, and brown for running lights. The brake lights and turn signals are combined.

We do carry a plug and play wiring harness for your 1997 Dodge Ram. Part # 118329 plugs into connectors at the rear of the truck along the inside of the frame rail on both sides.

If you're trying to power the trailer's brakes, then you'll need a 7-way trailer connector. For this use your # ETBC7 kit once you have the 4-way installed. This kit converts the 4-way to a 7-way and includes everything else needed to install a brake controller. If you need a brake controller as well, I recommend the Prodigy P3 # 90195 because of how reliable and easy to use it is.

I've attached link on wiring, as well as some videos you might find helpful.