Recommended Components For Tandem Axle Upgrade On Loadrite MC 1800 3 Rail Motorcycle Trailer
Published 01/27/2017 >
Products Featured in This Question
Question:
Do you have a kit so that I can upgrade to dual axle?
asked by: Mario D
Expert Reply:
Thank you for your email answering my questions on your axle. I have the information to help you with your tandem axle application.
Your current axle is not a standard size, so I recommend replacing your current axle as well. There are two routes to go for this, the more traditional style or the axle-less. For the Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Regular Tires - 2,000 lbs, # A20RS545, you simply mount the axles square and the suspension is integrated. Just put on tires and go. You will need to make sure there is a cross-member to support the weight over this section.
The more traditional route is to use the Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs, # 20545I-EZ-72-10 that will give you the dimension you need for your leaf springs, but will give you a slightly wider stance. You will also need the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts, # APUBR-10. For your hangers, you will need to weld on the hanger kit, # APT9. For leaf springs I recommend the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long, # e84SR. With this set-up, you will have to completely remove the current hangers and center the now two axles properly for the correct ride and tongue weight.
For tires, I recommend the Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D, # AM35354. These radial tires will give you a smooth ride on the highway and will give you a load range of 1220 lbs at 65 psi each. You will still be limited by your axle capacity even though the tires will give you a higher rating per axle.
Let me know if you have any other questions.

Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-3/8 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: swivel bracket boat trailer parts
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Video: DIY Install: Rhino-Rack RVP Roof Rack for Fixed Mounting Points on your 2017 Toyota Highlander
- Shop: Roof Rack
- Shop: Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2
- Shop: etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: etrailer Bolt-On Swivel Trailer Jack Mounting Plate Review
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Q&A: Replacement Axle for Harbor Freight Utility Trailer
- Q&A: Do Hangers Need to be Welded to Install
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
- Q&A: Hub, Leaf Spring, and U-Bolt Kit for 2,000 lb Trailer Axle
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity