Recommended Weight Distribution System for 2011 Nissan Xterra Towing a 2017 Rpod 179

Updated 12/12/2016 | Published 12/11/2016

Products Featured in This Question

Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW

(235)

$700.74

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1346)

$13.63

2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(2600)

$15.37

etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity

(811)

$219.10

Question:

Hello - I need some help deciding which sway bar would work best for me. I have a 2011 4x4 Xterra and will be pulling a 2017 Rpod 179. Rpod Hitch weight is 285lbs. Thanks for your help...this is new to me.

asked by: Rob M

Expert Reply:

The 285-pound tongue weight of your Rpod is likely the dry weight. So, you'll want to factor in anything else that could add to that. The best way to find your actual tongue weight is to use a scale, like # e99044. Also, a weight distribution system is chosen by the total tongue weight of your setup. This will include the weight of anything stored in the back of your Xterra behind the rear axle.

Once you have that determined you can pick a system. I suggest the Reese Steadi-Flex # RP66558. This system uses automobile-like friction pads to prevent sway. It's also easy to install since it bolts to your trailer's frame and doesn't use any chains. It's rated for up to 600 pounds tongue weight. You will need a hitch ball to go with it, # 63845 for a 2-inch ball or # 63847 for a 2-5/16 inch.

expert reply by: Charles S