Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
This is an excellent question Brad. The Dexter DX7.5L A-60 Brake Actuator #DX83FR is designed to bolt to a 3" wide by 5" tall frame while the Actuator #DX27FR is designed to bolt to a 3" wide by 4" tall frame. This…
view full answer...To mount the Curt T-Connector Vehicle Wiring Harness item #C56378 to the Draw-Tite item #76025 you will want to use the No-Drill Mount Bracket item #18136 and the item #18144. This will allow you to install the 4-way farther down from the hitch…
view full answer...I have a similar solution that can be used with a bike rack with the Roadmaster High Low Adapter part #RM-076 but the Blue Ox can only be used when flat towing a vehicle.
view full answer...The K-Source Universal Towing Mirror part #KS3891 is for one side, either the driver or passenger. If you need both then you would either want to order two of the above or the K-Source Universal Towing Mirrors part #KS3891-2. These are indeed a…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...The Electric Jack part #EJ-3520-BBX is what I recommend using as it's an excellent economical upgrade option. If you are replacing an exiting electric jack then just run the power wire to the battery, secure the flange to the frame, and…
view full answer...The EZ Coupler RV Sewer Hose w/ Swivel Lug Fitting and 4-in-1 Clear Elbow Adapter #D04-0114 doesn't come with any caps in order to seal them off and prevent dripping. Typically people will throw their waste hoses in their RV's bumper and use…
view full answer...Blue Ox states that their high/low adapters such as the #BX88132 you'd looked at should only be used for flat towing a vehicle, and not for a situation where tongue weight would be applied such as towing a trailer or using a hitch mounted…
view full answer...I spoke with my contact at Blue Ox regarding the High-Low Adapter for Tow Bars #BX88132 referenced in your question. He stated that this high-low adapter has a tongue weight capacity of 500 pounds and a towing weight maximum of 5,000 pounds. This…
view full answer...The fittings of the RhinoFLEX RV Sewer Hose with Swivel Fittings, 4-in-1 Adapter, and Storage Caps #CAM39761 will not fit in your bumper that is 3-3/4 inches (the bayonet fitting on this is the standard 4-3/16 inches), but the fittings are actually…
view full answer...The EZ Coupler RV Sewer Hose Kit w/ Swivel Fitting and 4-in-1 Clear Adapter - 10' Long Hose #D04-0114 is a 3 inch hose that will fit in your 4 inch round storage pipe. The clear adapter will not fit in the 4 inch storage pipe. It would need to be…
view full answer...I attached a picture that shows the modification needed to the bumper beam bracket. Exhaust lowering is not needed to install the hitch either. You will need to use the washers like what is shown for the install of the #76025 on a 2016 Honda Odyssey…
view full answer...Filter Your Search
Contact and Help