Troubleshooting Using Left Blinker That Engages Both Trailer Signal Lights
Question:
Trailblazer 2003 left indicator blinks on both sides also noted the hazard light is working what might be the problem.
asked by: Ray
Expert Reply:
In many cases a bad ground is to blame if you are turning on your left blinker and both of the turn signals on your trailer are going, but in order to determine the specific problem you will need to use a circuit tester such as # PTW2979 to test the connector on your 2003 Chevy Trailblazer after disconnecting it from your trailer. Check the wiring going into your harness from your tail lights to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring.
If the signals going to your harness are okay, you'll need to test the signals coming out of the harness, and if they are correct then your issue is likely going to be with the trailer side wiring. You will also want to check both your vehicle and trailer connectors for corrosion, which can be green or white in color. A build-up of corrosion can interfere with the signals getting through the connectors so if it is present you will need to either replace the plug or clean the corrosion and be sure to use Dielectric Grease # LT37534 to help stop any future corrosion.
As I mentioned above, an important issue you will want to take a look at are the ground connections, as they can be the cause of numerous lighting problems. You'll want to make sure your grounds are securely attached to bare metal surfaces free of any paint, dirt or corrosion of any kind. Also check your wiring thoroughly to ensure there are none that are crimped, broken or otherwise damaged.
I have added links to a pair of help articles on trailer wiring, including a troubleshooting guide which I highly recommend taking a look at.
Products Referenced in This Question
Loctite Bulb, Lamp, and Electrical Connection Dielectric Grease - 0.33-Oz Tube
- Accessories and Parts
- Wiring
- Dielectric Grease
- Loctite
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Tow Wiring Adapter Location For 2005 Ford Escape
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Choosing Between Tekonsha or Curt Powered Taillight Converter/Wiring Harness for 2020 Honda Odyssey
- Q&A: Trailer Turn Signals Both Blink at the Same Time When Right or Left Turn Signal is Turned On
- Q&A: Fuse Location for 12-Volt Accessory Feed to 7-Way Trailer Connector on 2005 Chevy Silverado
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: What Causes Trailer Wiring Harnesses to Short Out
- Q&A: Does Wiring Harness for 2018 Jeep Grand Cherokee Require Activating Tow Package Wiring Circuit
- Q&A: Trailer Lights on When 2003 Ford Windstar Lights are Off
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size