Replacement Hardware for Curt Trailer Hitch for 2016 Honda Accord  

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are…

Both the Curt 2" Receiver #C13397 and the 1-1/4" Receiver #C12169 use the same CM-SP2 Square Hole Spacers for the install on your 2018 Honda CR-V. The description of .250 x .88 x 2.25" stands for the dimensions of the spacers…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The Curt Trailer Hitch Receivers like part #C11681 which is a fit for a 2013 Honda Accord are designed so that anyone can install it. It requires almost no prior mechanical knowledge nor do you really need any special tools in most cases. The…

To install a hitch like the Curt Hitch part #C11681 that you referenced on your 2015 Honda Accord you will need to trim the heat shield. For more info on that check out the install video and installation instructions I attached.

Curt requires a stabilization strap for all Class I hitch mounted accessories to relieve stress that is put upon the hitch while carrying hitch mounted accessories. To utilize the Curt Support Strap #18050 on your Swagman XTC-2 simply loop the strap…

There are two main trailer hitch options for a 2020 Chevrolet Traverse, the Draw-Tite Max-Frame Trailer Hitch Receiver part #76184 (see photo one) and the Curt Trailer Hitch Receiver part #C13380 (see photo two). The main difference between the two…

The maximum towing capacity of your 2017 Honda Accord is 1,000 lbs. The towing capacity of the hitch will not change the vehicle's towing capacity as the lower of the two ratings (vehicle/hitch) will always be the limiting factor. For your…

We do indeed have the Curt trailer hitch receiver that fits your 2013 Honda Accord Sport, which is the following part number: - Curt Trailer Hitch Receiver #C11681 I verified this fit directly with Curt for you.