SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Item # SB324-080
Our Price: $2,260.25
Confirmed to Fit
2004 Ford Van
E-150, E-250, and E-350
E-350 RV Cutaway
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Photos
2004 Ford Van - SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
- SnowBear
- Vehicle Snowplow
- Fits 2 Inch Receiver
- Wireless Remote and In-Cab Switch
- Adjustable Blade - 3 Angles
- Steel Cutting Edge
- Steel Blade
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver (sold separately)
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:<>
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 315 lbs
- 1-Year limited warranty
Notes:
- Due to the size of this item it ships via truck freight.
- Bottom of 2" receiver tube must be 13" from the ground.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately) . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Installation Details
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080
Average Customer Rating: 4.1 out of 5 stars (7 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.by: Mike07/25/2023
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
by: John12/20/2023
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
by: Bill11/17/2023
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
by: Michael 12/30/2023
Works well for the price.
by: Jennifer 01/20/2021
Honda Ridgeline
I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.
by: Timothy02/27/2020
etrailer has been a great!!! They have been updating me on all the shipments.
by: Antonio02/22/2023
7
7
See what our Experts say about this SnowBear Snow Plow
- Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with WinchThe SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
view full answer... - Can Draw-Tite Front Mount Hitch 65080 Mount Snow PlowYes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about: - Draw-Tite Front Mount Trailer Hitch Receiver # 65080 This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
view full answer... - What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is...
view full answer... - Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
view full answer... - Snowplow and Front Mount Trailer Hitch for a 2015 Ford F-150Yes, I recommend the SnowBear 82 inch snowplow # SB324-080 for your 2015 Ford F-150. You will also need to have a front mount hitch installed, # C31083, to mount and use the plow. I also recommend the off-road lighting kit for this plow, # SB324-127, for better visibility when plowing at night since plows have the tendency to block vehicle lights.
view full answer... - Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge DurangoWe have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models. If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions...
view full answer... - Is Curt Hitch C31064 Same as FHK31064 For 2013 Honda Pilot for Snow PlowYes, the Curt hitch part # C31064 that you referenced is the same as the FHK31064 that you mentioned from Meyer Plow. Curt front hitches are the most commonly recommended by plow companies and it's very common they'll slightly change the part numbers or rebrand them as their own which is what's going on in your case. With this hitch installed on your 2013 Honda Pilot you could use the Snowbear Plow part # SB324-080 which is 82 inches wide, 19 inches tall, and is easily controllable wirelessly...
view full answer... - Snow Plow for a 2005 Honda PilotWe have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work. The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328. This particular plow is 82" wide and 19" tall.
view full answer... - Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" TallThe correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
view full answer... - Dimensions of SnowBear Snowplow Replacement Scraper BladeThe Replacement Scraper Blade # SB324-065 is 82 inches long and about 2-1/2 inches wide. It's a direct fit for the following snowplows: SnowBear Personal Snowplow # SB324-080 SnowBear Proshovel Snowplow # SB324-168 SnowBear Winter Wolf Snowplow # SB324-166
view full answer... - Snowplow for a 2000 Jeep Wrangler with Front Receiver Hitch in BumperThe first thing you will want to do is check to make sure that you can use a snow plow with the front mount bumper hitch on your 2000 Jeep Wrangler. The hitch will also need to be rated for the weight of the plow itself. Snowbear plow # SB324-080 is a great option. It comes with its own winch to raise and lower the blade. The blade is 82 inches wide and 19 inches tall and there is no restriction on hitch receiver height. This plow weighs 315 pounds. The large holes in the A-frame winch...
view full answer...
- Front Mounted Receiver Hitch For 2018 Ford F150I'd be happy to help you with that! I'd recommend the Draw-Tite front mounted receiver, part # 65067 which would work well for carrying a bike rack. Front mounted receivers are also handy for moving trailers around in tight quarters and are ideal as a mount for a light-duty personal snow plow like # SB324-080. If you click the provided links, you can see the installation instruction and video.
view full answer... - Snow Plow Recommendation for a 2002 Jeep WranglerActually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you. I attached a review video for this plow for you to check out as well.
view full answer... - Which Front Hitch Fits 1998 Jeep Wrangler for Use with Snow PlowSince your goal is to push a plow with a front hitch for our 1998 Jeep Wrangler you'd want the hitch part # C31028 instead as the Draw Tite # 65048 puts the hitch opening too high for a plow like the SnowBear part # SB324-080 to be used. In the install instructions there's no mention of needing to remove tow hooks so you wouldn't need to remove them.
view full answer... - Snow Plow For 2003 Ford RangerWe do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
view full answer... - Front Hitch for 2018 Jeep JL Wrangler Unlimited with No-Drill InstallationFor your 2018 Jeep JL Wrangler Unlimited the front-mount 2-inch hitch I recommend is the Draw-Tite # 65079. Installation requires no drilling and all hardware is included. We have not had a chance to make an installation video for this item on your specific vehicle but the written instructions are linked for you. Minor fascia trimming and skid shield removal will be required. With this 2-inch hitch installed you will easily have the weight capacity for using accessories such as a hitch-mount...
view full answer... - Plow Recommendation for 2008 Jeep Liberty with Curt Hitch C31020 InstalledThe Curt Front Hitch part # C31020 would be an excellent choice for your 2008 Jeep Liberty so that you can do some snow plowing. For a compatible snow plow that would do a great job and would be very easy to use I would recommend the Snowbear # SB324-080. This plow is super easy to use as it can be totally controlled from the interior of your vehicle. The blade is 82 inches wide and 19 inches tall which is a great size for your application.
view full answer... - Snow Plow Compatible with 2003 Jeep Grand Cherokee LaredoThere is not a bracket kit that fits a Laredo model. You will need to use the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31048 and then use either 82x19 inch snowplow # SB324-080 or # SB324-081 for 84x22 inch snowplow.
view full answer... - Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep LibertyThe Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121. You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
view full answer... - Recommended Front Trailer Hitch And Snowplow For 2015 Ram 2500 4-Wheel DriveThe front trailer hitch I recommend for your Ram is the Curt Front Hitch, part # C31015. This hitch has a 2 inch receiver opening and can be used with many accessories like a plow or a winch. I have attached a link to an installation video you can check out. The snowplow I recommend is the SnowBear Personal Snowplow, part # SB324-080. This system comes with an electric winch that allows you to raise or lower the plow from the comfort of your truck cab. The plow has an adjustable, 5-position...
view full answer...
- Where Does Curt Hitch Tube Opening Sit on 2002 Jeep Grand Cherokee When InstalledI was able to find a better picture that shows where the hitch opening of the Curt front hitch part # C31048 will be when installed on a similar Jeep Grand Cherokee as your 2002 model that I attached to this page. It basically just sits right below the front bumper. I also lightened up the picture you mentioned so that you can see where it's at on that picture as well.
view full answer...
- Comparing Snow Plows for 2017 Ford F-250 4x4For all of the plows you mentioned you'd need the Curt hitch part # C31078 installed on your 2017 Ford F-250 to use them. The winch style is the most common seen and is generally considered to be the most reliable and best option. If for nothing else the visibility is much better with them like on the part # SB324-080 over the # SB324-140 due to the actuating arm. The K2 plow part # K2AVAL8422 is a great plow, the Snowbears are a bit more popular and well-known, but this plow is solid...
view full answer... - Front Hitch Recommendation for 2020 Jeep Wrangler for Use with Snow PlowCurt is the front hitch manufacturer that our snow plow manufacturers recommend with their kits so for your 2020 Jeep Wrangler you'd want the Curt # C31086 and you'd be set. This would work great with a hitch mounted plow setup like the # SB324-080.
view full answer... - Front Hitch Recommendation for 2020 Ford F-150The front hitch I recommend for your 2020 Ford F-150 is the Curt part # C31083 as it has plenty of weight capacity and installs easily. Also, Curt front hitches are the ones our snow plow manufacturers recommend and test with so we know they are very solid when used with plows like the SnowBear # SB324-080.
view full answer...
Do you have a question about this Snow Plow?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Sabrina W
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
7/28/2023
How cool is that?! Thanks for sharing the awesome photo!