To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Mitsubishi Outlander Sport with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (34 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.excellent plug and play set up. Hardest part is running Power wire from battery to rear of vehicle. removing taillights and installing Y harness was easy and makes connecting your trailers lights easy. I would leave the pig tail in the spare tire compartment until needed and then just run out the tailgate to connect to trailer when needed
No issues thus far
Hi, I finally got around to installing the trailer hitch and wiring set-up on my 2013 Outlander Sport. The weather was a factor as I have to work outside and at 78 years old I do not do good in the cold. Let me tell you what a pleasure it is to get something that installs and works like it is claimed to do. The hitch went on very easy( longer than 30 minutes tho because I move slow) and the wiring took a little longer but the instructions were very clear on both. I needed the hitch on my spouses vehicle to carry my mobility scooter. I put one on mine last year(also ordered from you) This will do the job. Thank you for the great service and products. JKH
Excellent customer service, Anna called to make sure I knew the name brand of the wiring harness would be different than I expected. Plus she was watching the order to make sure it went on the shipping truck right away because I needed it ASAP. When the product arrived it was easy to install and fit perfectly, I could not be happier.
Thank you so much, I will recommend you when ever I have a chance.
Shawn
husband laughed when I told him I ordered a wire kit for the trailer hitch he's old school and always just spliced in well he used the kit took about 45 minutes he was amazed it worked right the first time lol I think I said told you so would reccomend
Everything bolted up and went together as advertised. Hitch and wiring harness. Would definitely recommend
Great product with well written instructions and all needed parts to install. It took a bit more time running the power wire on the inside of the vehicle but that was my choice as i did not want it on the outside. The only thing that I did which I think improved it was I used shrink tube over the supplied connectors for a cleaner and more protected connection.
This Tekonsha Trailer Wiring Kit worked great. It came with everything that I needed to install it and had very good instructions.
Well, I had my doubts when U-Haul and my Mitsubishi dealer said that no wire harness was available for my 2012 Outlander Sport. Thank G for the internet. Their you were. With my wire harness. U-Haul was nice enough to install it for me and it's all good. Going sailing this weekend!
Stan
The sales staff are more than a 5 star took there time and explained how it would be installed. Received the kit have not installed it yet opened up the kit and everything was exactly what the sales person had explained. I was told if i have a problem to call them with their fast shipping you can't beat it. Can't wait to start this plug and play project.
Installation took about 3 hours. The hardest parts were routing under the body of the car and removing all the interior pieces. Not the kits fault, just not the easiest tasks to do. The connectors for the tail-lights fit perfect, just like OEM. Be very careful when prying out the interior pieces of the car. The foam pieces surrounding the tire do not need to be removed on a 2012 Mitsubishi Outlander Sport.
Product arrived on time and works well. The actually installation on an outlander sport isn't as easy and expected as you have to remove all interior panels in the back on the car... But still a good product and would do business again.
I've had them on my vehicle for a year and used it for two cross country moves towing a trailer and everything has held up beautifully!
The wire harness fit perfectly, and was very easy to install.
I was greatly impressed with the haste at which my order was recieved and processed. The product visually looks very well built and I'm excited to install it. I was very happy they were able to work with me in getting this part shipped to Alaska, now I gotta fly to the east coast install on my new car and drive it home with the new trailer I purchased as well.
Thanks again for your awesome customer service.
First time order from etrailer. Just have to say etailer was a pleasure to deal with!! Great communication!! I will recommend to anyone! Thanks for the great service
Install could not have been easier, everything is basicly plug and play. Total install time was about 30 min with basic tools. Could not be happier with this product.
Product arrived on time and in good condition. Product had good instructions and installed properly. Product works perfectly, as advertised. Thank you.
My shipment arrived in a timely manner.
And Installation took about 30 minutes couldn’t be more pleased
getting hitch installed monday . never had a problem good service and good products
Worked out great thanks
Thank you for the great service and fast shipping!!!
Tommy you were awesome!!!!
Received parts as ordered and on the date specified. Very happy with the product as it is very well constructed. Thank you for a great product.
GREAT BUYING EXPERIENCE , EXCELLENT SERVICE , FAST DELIVERY .
Good product.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gerardo
6/7/2023
Still working great. Have had no issues with the wiring harness, connectors or the lights. its nice to have ready and available whenever we need to hook up a trailer. most of the time the trailer connector is tucked away in the spare tire compartment