Gooseneck Coupler Head Kit

Ask the Experts about this etrailer Accessories and Parts

• How Does the Gooseneck Coupler Head Kit # GC-HEAD Install
  I have included a picture showing how the parts of gooseneck coupler # GC-HEAD go together. They would be welded to the coupler tube in this configuration. Welding should be done by a professional welder. There are no specific instructions for the install.
  view full answer...
• Does The etrailer Gooseneck Coupler Head Kit Fit a 4 Inch Gooseneck Coupler Inner Tube
  Yes, the Gooseneck Coupler Head Kit part # GC-HEAD replaces the coupler head on etrailer.com or Ram, round and square Gooseneck couplers. It is designed for use with GCPN Series, GCSQ Series, and GCSQTW Series couplers which all have the 4" inner diameter tube and 4-1/2" diameter outer tube. I have attached a photo of the coupler head installed on Ram Round Gooseneck Coupler part # GCPN-25008 for your reference.
  view full answer...
• What is the Capacity of Gooseneck Coupler Head Kit, # GC-HEAD
  The Gooseneck Coupler Head Kit, # GC-HEAD, was designed for use with GCPN Series, GCSQ Series, and GCSQTW Series couplers which range in capacity from 25,000 to 30,000 pounds. So the maximum would be 30,000 pounds.
  view full answer...
• Recommended Replacement Coupler For Gooseneck With A 4-1/2 Inch Square Tube
  If you need to only replace the coupler, I'd recommend the Gooseneck Coupler Head Kit, # GC-HEAD, for etrailer or Ram replacement couplers or the Bulldog Gooseneck Coupler Repair Kit, # BD0287740300, for Bulldog couplers. To replace your gooseneck coupler inner assembly for your 4-1/2 inch square tube, I would recommend the Bulldog BX1 Gooseneck Coupler Inner Tube - Square - 2-5/16" Ball - 25,000 lbs, # BD1289210300, which is 22-1/2 inches long. Another coupler I'd recommend that is...
  view full answer...
• Type of Metal the Gooseneck Coupler Head Kit # GC-HEAD is Made From
  According to the manufacturer the Gooseneck Coupler Head Kit # GC-HEAD is made from mild cast steel.
  view full answer...
• What Size Ball Does the Gooseneck Coupler Head Kit Fit
  Yes, the Gooseneck Coupler Head, part # GC-HEAD, fits on a standard 2-5/16 inch gooseneck ball.
  view full answer...
• What is the Shipping Weight of the Gooseneck Coupler Head Kit
  The Gooseneck Coupler Head Kit # GC-HEAD has a shipping weight of 13-lbs.
  view full answer...
• Is There a 3-1/2 Inch Per Side Inner Gooseneck Coupler Available?
  There is not an inner gooseneck coupler square tube we carry that has the 3.5 inch outer dimension you referenced. All of the square gooseneck couplers we carry from all brands have the inner sleeve outer measurement of 4 inches on each side like the Bulldog BX1 Gooseneck Coupler Inner Tube - Square - 2-5/16" Ball - 25,000 lbs # BD1289210300. If you need to have something custom made for your dimensions, then I recommend using the Gooseneck Coupler Head Kit # GC-HEAD to give you the...
  view full answer...