Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(216 reviews)
Price: $204.45
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$216.06
Our Price: $204.45
You Save: $11.61
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (216)
- Q & A (0)
- Photos
- Used (2)
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (216 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: Andrew07/22/2021
If I could give a 3.5 out of 5, I would. These tie-downs serve their purpose, but definitely not recommended for a bigger camper. I would say my camper is average sized. These tie-downs hold my camper in place the majority of the time, some small movements when I'm on rough roads, but nothing too dramatic.
Negatives.
Two of the four lost the padded backing where the tie down meets the inside of the truck bed. Had to go buy some foam and create my own. They flex quite a bit with a camper the size of mine, wouldn't go down any rough roads.
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: D Gagnon05/14/2017
Could be happier took about 15 minutes to install can't wait to go camping
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
25
216
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Are Brophy Tie-Downs Compatible with Newer Super Duty Pickups with Aluminum BedYou can use the Brophy Clamp On Camper Tie-Downs # HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs # HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are dimensional photos of each for you to reference with your application. You will notice that one, part # HSAB, has an extra bend towards the end where you attach your tie-downs.
view full answer...
- In Need Of Camping Tie-Downs For My 2022 Ford F-450 The only tie-downs we offer to fit your 2022 Ford F-450 are by TorkLift. Unfortunately, I would need more information to get you setup with the correct fit. For example, if you have running boards, or a step underneath truck bed, and a Torklift SuperHitch Magnum 30K, you would need the following items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF2021 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLR3504 There are still some caveats. If you have factory...
view full answer... - Will Brophy Clamp On Camper Tie-Downs # HSSF Fit a 2014 Nissan Titan King Cab?The Brophy Clamp On Camper Tie-Downs # HSSF are a great option for securing your camper to your truck. To make sure these tie-downs will fit your 2014 Nissan Titan, you need to take some measurements on your truck. First, measure the width of the top rails on your truck bed to make sure they are less than 5-1/2". Next, make sure you have at least 2" of space beneath the lip of the bed rail. Note that these are not compatible with drop-in bed liners, plastic bed rails, double-walled beds,...
view full answer... - Will Brophy Camper Tie Downs # HSSF Fit 2010 Toyota Tundra with Spray-In Bed LinerMy contact at Brophy advises that they have not done a test fit of their Camper Tie Down # HSSF on your 2010 Toyota Tundra. However, the key requirement for this product to properly fit your truck side rails is that there must be at least 2 inches of horizontal space underneath the lip of the bed rail. If you refer to the linked installation instructions you will see a cross-section diagram illustrating how the HSSF clamps around the bed rail. The 2 inches of space required is for fitting...
view full answer...
- Truck Bed Camper Tie Down Recommendation for a 2001 Dodge Ram DuallyFor camper tie downs, I recommend the Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF, with Camper Tie Down Hardware Package, # TDHP. The tie downs will fit with any camper that is a correct fit for your truck. With that said, with the fuel tank in the bed of your 2001 Dodge Ram Dually is sounds as if the camper will hang out passed the end of the bed by 2 feet. The tie downs wrap around the bed rails and mount inside the bed. They are not limited to stake pocket location...
view full answer... - Will the # HSSF Camper Tie Downs Fit on a 1997 Chevrolet 3500 Dually Truck and Slide in CamperThe Brophy Camper Hold Downs, item # HSSF, should fit on your 1997 Chevrolet 1 ton Dually. Some dually beds interfere with the installation of the hardware. They will definitely work with your 8-1/2 foot slide in camper, if there is room to install them on the bed of your truck.. The hold downs do not fit in the stake pockets, but wrap around the bed rails and are mounted inside the bed. When attached the chains are tightened and pressure is applied from the inside of the bed out and...
view full answer...
- Will the Brophy Camper Hold Downs # HSSF Fit on a 2010 Ford F-150The Brophy Camper Hold Downs, # HSSF, should work well with your 2010 Ford F-150. I spoke with my contact at Brophy and she has not had any complaints of a fit issue since Ford changed the design in 2009. To be absolutely certain that these hold downs will fit your truck, I recommend looking at your truck bed. I can tell you that you will need at least 2 inches of space under the top of the truck bed side wall for the hold downs to fit properly. Some trucks will have double walls near...
view full answer... - Brophy Camper Tie Downs and Hardware Kit for 2012 Ford F-150We have the Brophy camper tie downs # HSSF with the hardware kit # TDHP which will fit your 2012 Ford F-150 and work great as a way to secure your camper.
view full answer... - Do Brophy Camper Tie Downs have a Weight Capacity RatingThere is no weight capacity rating on the camper tie downs # HSSF and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Will the Brophy Camper Hold Downs Fit on a 2001 Ford F150The Camper Hold Downs, part number HSSF may work on your 2001 Ford F150 Supercrew. The hold downs do not fit in the stake pockets but wraps around the bed rails and are mounted inside the bed. Dual rear wheel beds can present a problem, and you should check to be sure that there is room to install the parts on your truck. There is no weight capacity rating on the hold downs and the will work for any camper size that is properly sized for your vehicle. I added a photo showing a camper hold...
view full answer...
- Will Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF Fit a 2003 Dodge Ram 3500The Camper Hold Down Black Powder Coated Finish (Qty 4), # HSSF, will fit your 2003 Dodge Ram 3500. There is not weight capacity rating for these hold downs and they are designed to work for any camper that is a correct fit for your vehicle.
view full answer... - Recommended Camper Tie-Downs For 2000 GMC Sierra 1500I spoke with my contact at Brophy and they told me that since 1988, GM has recommended not using the stake-pocket camper tie-downs on their trucks, which would include your 2000 GMC Sierra 1500. It is not a matter of them not fitting, but per the truck manufacturer, I cannot recommend them. I do recommend using the Brophy Heavy Duty Tie-Downs, part # HSSF. These clamp to the inside of the truck bed and do not require any drilling for installation. I have attached a product review for...
view full answer...
- Brophy Camper Tie Down Recommendation for a 2015 Ford F-250The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2015 Ford F-250. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Spring Loaded or Rigid Turnbuckles for CR Brophy # HSSF Truck Bed Camper Tie-DownBrophy recommends using their rigid tie down hardware kit, part # TDHP, as their tie downs provide a small amount of flex.
view full answer... - Brophy Camper Tie Downs that Fit 2013 Ram 2500HDThe Brophy Angled Hold-Downs # HSAB, Camper Hold Down # HSSF, and the Camper Hold Down Zinc Finish # HSBP will all fit your 2013 Ram 2500. The Brophy Angled Hold-Downs # HSAB have neoprene pads to protect your truck's paint. They also provide more clearance between the hold-downs and the outside truck fenders. If you need hardware to tie down your camper, I recommend the Camper Tie-Down Hardware Package # TDHP.
view full answer... - Camper Tie Down Recommendation for 2013 RamYes, the stake pocket camper tie downs, # TDSF, will work on the 2013 Dodge Ram, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - If Brophy Camper Tie Downs Bend Can they be Bent BackIf the bend wasn't enough to affect the integrity of the tie downs then yes you could bend them back. So basically bend them back and as long as you don't see any metal creasing, paint flaking, or any other obvious signs of stress you'd be fine. If they are stressed to the point they need replacing these have a 1 year warranty.
view full answer... - How Far Do the Brophy Truck Bed Camper Tie-Downs Stick Out from the Truck?The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF will stick out from the bed rail differently for every truck model. The best way for you to know exactly how they will fit on your 2012 Ford Super Duty is to look at the overall measurements. I went out to the warehouse to measure the bracket and from the inside to inside at the widest point it is 10-3/4 inches. You may also be interested in the Brophy Basic Turnbuckles w/ Hardware for Camper...
view full answer...
- Recommended Camper Tie-Downs for 2012 Ford F-250 with Running Boards I do have a great option for you, however there aren't any TorkLift Custom Camper Tie-Downs available for your 2012 Ford F-250 Crew Cab that's equipped with running boards. The best option for your F-250 is with a universal set of tie-downs like the excellent Brophy # HSSF paired with the Turnbuckles and Hardware Kit # TDHP. These durable tie-downs simply get clamped onto the bed rails of your truck without the need for drilling. The mounting hardware is included. You will just want...
view full answer... - Will The Brophy Camper Tie Downs # HSSF Fit My 1999 Ford F-250 Super DutyThe Brophy Camper Tie Downs, part # HSSF, are a universal item for domestic full-size trucks and will fit your 1999 Ford F-250 Super Duty. The # HSSF tie downs can be used on any size camper. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The recommended hardware kit is the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Camper Tie Down Recommendations for a Chevy Silverado 2500There are several camper tie downs that you could use depending on how you want them to mount. First, the Camper Tie Downs, # TDSF, that you have referenced will fit your truck and fit in the truck stake pockets. If you do not want something in the stake pockets, then I recommend going with Camper Hold Down, # HSSF, which wrap around the bed side. For either kit, use Camper Tie Down Hardware Package, # TDHP.
view full answer... - Compatibility of Brophy Camper Tie Down # HSSF in a 2010 Dodge Ram 1500These Brophy Camper Tie Down, part # HSSF, are universal fit items so they would work on your 2010 Dodge Ram 1500. There is not a weight capacity on these hold downs either, and they should work on any camper that is a correct fit for your vehicle.
view full answer... - Camper Tie-Downs for 2002 Ram with Truck Bed Camper of a Different SizeThe Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF are not ideal if the camper won't be resting on them. The amount of torque if the camper is not resting on them may cause them to deform or the bed rail of your truck where they connect to have issues. If however the camper rests on the rails and is raised off the bed, that could be a different issue with all the weight on the rails. In that instance, the Brophy tie-downs will work well to secure...
view full answer... - Camper Tie Down Recommendation for a 2014 Ram 1500 with Running BoardsI have a set of camper tie downs that will fit your 2014 Ram 1500, but they attach at the stake pockets of the bed and not the frame like the Torklifts do. There is no Torklift option for your truck if it has running boards. The Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2014 Dodge Ram 1500. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part # HSSF is Camper Tie Down Hardware Package, part...
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.