Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $118.22
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $118.22
You Save: $53.19
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Chad07/26/2023
Works perfect for what I needed
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Craig07/15/2023
Fit and finish. We're perfect.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Which Brophy Camper Tie Downs Fit 2011 Chevy Silverado Long BedI do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2011 Silverado. The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your truck. You'd also need the hardware kit part # TDHP as well and you'd be set.
view full answer... - Do Brophy Camper Tie Downs TDSF Fit 2004 Ford F-350 DuallyYes, the Brophy camper tie downs part # TDSF are a fit for your 2004 Ford F-350 dually.
view full answer... - Are Brophy Stake Pocket Mounted Camper Tie-Downs Sold In PairsThe Brophy Stake Pocket Mounted Camper Tie-Downs are all sold in a quantity of 4, including the kit # TDSF you're wanting. This is just how Brophy kits them together so they aren't available only in pairs. You can either use the extra 2 that you don't plan on using either as a backup or you can sell them to help offset what you paid for the whole kit.
view full answer... - Recommended Camper Tie Downs for a 2005 Ford F-250 4x4 Regular Cab 8 Foot Bed DieselNo, the stake pocket mount tie downs, # TDSF, are only good for campers up to 8 feet long. You would need camper tie downs # HSSF instead for your 2005 Ford F-250. I have included a link to a video review and the instructions to the right. I also recommend camper tie down hardware package # TDHP. You may also be able to install frame mount tie downs which would be ideal. I have included a link to the custom fit frame mount tie downs for the 2005 Ford F-250. You will need to use the drop...
view full answer... - Difference Between The Brophy Tie Downs TDSF and HSSF For a Camper Towed By a 2000 Ford F-150I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where as part # HSSF mounts over the sidewall of the truck bed. Also, part # HSSF is ok to use in trucks with spray-in bed liners. If your truck has a drop-in bed liner, it...
view full answer... - Camper Tie-Down Options for a 2022 Ford F-150 That Has Wheel to Wheel Running BoardsBecause you have running boards that run from wheel to wheel, there is not a set of custom tie-downs that fit your 2022 Ford F-150. You will have to use a set of universal tie-downs. I have listed universal tie-downs below, there are two different mount styles. Clamp-on - Brophy Clamp On Camper Tie-Downs # HSAB Stake Pocket Mount - Brophy Stake Pocket Mounted Camper Tie Downs # TDSF You will also need turnbuckles to secure the camper to the tie-downs. - Brophy Basic Turnbuckles w/ Hardware...
view full answer... - Will Brophy Stake Pocket Mount Tie Downs Fit a 1996 Dodge RamThe Camper Tie Downs, # TDSF, are a universal item made for full size trucks so they would most likely fit your 1996 Dodge Ram. They will also fit any camper that is a fit for your truck. The Camper Tie Down hardware Package, # TDHP, is the correct hardware for the tie downs.
view full answer...
- Will Brophy Camper Tie Downs, # TDSF Fit a 2002 Ford F-150 and 1,700 Pound CamperThe Brophy Camper Tie Downs, # TDSF, are a universal application for full-size trucks and they will fit your 2002 Ford F-150. These tie downs come with hardware to mount them to your truck, but you will also need the Camper Tie Down Hardware Package, # TDHP, for a complete set up.
view full answer... - Recommended Truck Bed Camper Tie-Downs and Turnbuckles for 2020 Ford F-250As you've found, unfortunately none of CR Brophy's tie downs are compatible with your truck, but we do offer tie-down fits from TorkLift. The correct tie-downs will depend on how your truck is equipped and will depend on the bed length, if the truck has wheel to wheel running boards or side steps that extend PAST the cab and under the truck bed and whether or not the truck has a rear hitch and who manufactured it. So (deep breath) here are the various fits for the above mentioned possible...
view full answer... - Camper Tie Downs for a 2006 Ford F-150 SupercrewThe measurements and requirements of the hold downs and the bed sides on a 2006 Ford F-150 are not compatible so you that is why you cannot use # HSSF. You may be able to use stake pocket mount tie downs # TDSF. Take a look at the instructions I have linked and compare them to your truck to ensure fit. With this tie down kit you can also use tie down hardware # TDHP.
view full answer... - Will Brophy Camper Tie Down Kit # TDSF Fit 2006 Dodge Ram 3500Yes the Brophy camper tie downs part # TDSF will fit your 2006 Dodge Ram 3500 and will work great as long as your camper is less than 8 feet long. The only other item you'd need is the correct hardware kit which would be the part # TDHP which goes from the tie down to the camper.
view full answer... - Will Brophy Camper Tie Downs # TDSF Fit a 1999 Ford F-350 Super Duty DuallyThe Brophy Camper Tie Downs, part # TDSF, that you have referenced can be used on campers that are up to 8 feet in length. There is no weight capacity rating on the camper tie downs and they will work on your 1999 Ford F-350 Super Duty Dually with a properly sized camper for your vehicle which is less than 8 foot in length. The Brophy # TDSF tie downs are a universal application for full-size trucks.These tie downs come with hardware to mount them to your truck, but you will also need...
view full answer... - Can You Get A Single Brophy Stake Pocket Mounted Camper Tie-DownUnfortunately the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF only come as a complete kit so you wouldn't be able to purchase just one. That being said, if one broke the others might not be too far behind so it definitely wouldn't hurt to replace each one just to ensure the safety of your truck and camper.
view full answer... - Camper Tie Downs that Fit 2021 GMC Sierra 2500It looks like it's not, we only have the frame mounted tie downs from Torklift like the # TLC2225 and # TLC3221. The frame style provides a much more solid connection and also helps reduce side to side movement.
view full answer... - What Tie Down System Will Work for a 7-1/2ft Camper on a 2008 Ford F-150 SuperCab Short BedThe Brophy Tie Down # TDSF will hold your 7-1/2 ft camper on your 2008 Ford F-150 SuperCab Short Bed truck. To complete the installation you also need the Brophy Tie Down Hardware Package # TDHP.
view full answer... - Brophy Camper Tie Downs that Fit 1988 Ford RangerThe Brophy Camper Tie Downs part # TDSF that you referenced are a fit for your 1988 Ford Ranger and will work well. We had a customer with a similar Ranger use these and they told us they worked great afterwards. The hardware kit you'd also need to attach these to your camper is the # TDHP.
view full answer... - Will Brophy Camper Tie Downs Work Well on 2006 Chevy SilveradoTorklift frame mounted camper tie downs are the best option out there for securing a camper to a truck bed. But that said the Brophy camper tie downs part # TDSF which are a universal style of fit do work really well for our customers who have tried them. The price for them is really hard to beat as well. We've not had any reliability issues with these at all either. The only issues we've ever had are that they don't fit every stake pocket out there. We do know they'll fit Silverado stake...
view full answer... - Camper Tie Down Recommendation for a 2015 Ford F-150The Camper Tie Downs part # TDSF that you referenced are a universal install tie-down system that would work well on your 2015 Ford F-150. You should still check owners manual of your truck to see if there are any restrictions on using truck bed mounted camper tie downs. For a hardware kit you would need the # TDHP.
view full answer... - Camper Tie Down Recommendation for a 2000 Chevy 1/2 Ton SilveradoThere are several camper tie downs that you could use depending on how you want them to mount. First, the Camper Tie Downs, # TDSF, that you have referenced will fit your truck and fit in the truck stake pockets. If you do not want something in the stake pockets, then I recommend going with Camper Hold Down, # HSSF, which wrap around the bed side. For either kit, use Camper Tie Down Hardware Package, # TDHP.
view full answer... - Fitment of Brophy Stake Pocket Mounted Camper Tie Downs 2020 Toyota TacomaThe Brophy Stake Pocket Mounted Camper Tie Downs, # TDSF will work with your 2020 Toyota Tacoma. This comes with 3 removable spacers to allow a tight fit in your stake pockets. I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs, # TDHP. This turnbuckle will expand from 7-5/8 inches to 20 inches and with the included chain and S hook can reach up to 19-3/4 inches.
view full answer... - Camper Tie Down Availability for a 2013 Chevy Silverado that Attach to Bed RailsYes, the Camper tie downs part # HSSF will work on your 2013 Chevy Silverado but there is another option for you to consider. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where as part # HSSF mounts over the sidewall...
view full answer... - Will the Brophy Camper Tie Downs # TDSF Fit a 2013 Ford F150The Stake Pocket Mount Camper Tie Downs, # TDSF, are a universal fit item intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2013 Ford F-150. These should clear the sides of your box and eliminate the rubbing you are experiencing. You may also be interested in the Camper Tie Down Hardware Package # TDHP to secure the camper to the tie-downs.
view full answer... - Which CR Brophy Truck Bed Camper Tie Downs for a 2019 Chevy Silverado 1500As long as you have at least 2 inches of available width between the inside bulkhead of the bed side and the inside of the inner lip on the top of the bed side (see diagram), the # HSAB is a fit according to CR Brophy. To attach the tie downs to the anchor points on the truck bed camper, you'll also need the # TDHP turnbuckle kit. According to CR Brophy, the # TDSF tie downs wouldn't be compatible. If you click the provided links, you an see product description videos for the tie down...
view full answer...
- Recommended Camper Tie-Downs for a 2008 Ford Ranger Extended Cab 4x4 6 Foot BedThe Brophy stake pocket camper tie downs part # TDSF will fit most full-size pickups with straight fenders and single-wall construction. Since your 2008 Ford Ranger extended cab is considered a compact pickup truck, the Brophy stake pocket camper tie downs won't be a fit. If your Ford Ranger has a 6 Foot Bed - without running boards or steps underneath the truck bed, and with a factory installed hitch, then use # TLF2013 for the front and # TLF3004 for the rear. If your Ranger has a 6...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.