Best Nissan Altima RV Vents And Fans

After many months of fretting over cutting into the roof of my new van, and waiting for the rainy season to end, I found the installation very easy, and the operation is great. We're currently on a road trip, and the MaxxAir has made camping much more comfortable, and it even improves air circulation while driving with the vent open. it's very quiet at low speed and no leaks in even the heaviest rain.

Click to Enlarge

Decided to try the delux fan on my current lance camper. I installed a Maxxfan plus on the last camper, but wanted one with an integrated vent cover instead of needing an extra piece. The lower roof profile is a big plus for me with this fan. Very easy install just like other Maxxfan units. The fan is quiet and pulls a lot of air.

Easily and effortlessly installed. They are made of nylon or flexible plastic I believe. White, powder coated aluminum would have been better but after a few hours of searching these were the nicest looking and the best price.

Click to Enlarge

Click to Enlarge

Hi Carol, I bought a lot of things from etrailer, I'm looking for two rear doors for my trailer, do you sell doors for a 24x60 triailer, or where can I find them? thanks

Click to Enlarge

My experience with etrailer could not have been better. Their online catalog had very good pictures and product description, so I was confident the I was ordering the right item for my application. Pricing was competitive. George J emailed me after I placed the order to let me know he upgraded my shipping so I could get the product sooner. The vent covers came well packaged and undamaged. Now I need to install them on my vintage 1964 Airstream Overlander, which I bought several years ago and rehabilitated. The white plastic vent covers I installed several years ago became brittle and crumbled. I hope the smoke colored ones I bought from etrailer will last a bit longer, but the price was so fair I bought an extra pair for the next time.

Click to Enlarge

The roof vents that I purchased was exactly what I needed! The shipping was fast. I installed them myself yesterday and it was pretty simple! I have purchased from etrailer.com before and have been very pleased with my purchases! Thank you!

The order was processed quickly and I was kept informed on the status with e-mails. Vent cover installation and fit up was easy. The mate up of the existing open/close mechanism was a little "fussy". But a re-review of the included instructions confirmed the correct orientation. After I applied a small amount of grease to the friction retaining clip and slide, it was working as good as new.

Pleasantly pleased with this vent cover. Its fit over the roof opening of our 20 year old hay trailer was a bit tight so the plastic dome wouldn't descend flush to the trailer roof. It seemed the closing edge opposite the hinge was bowed inward a little. (Might have been compressed during shipping, but the outside of the box was not damaged). Anyway, I was able to gently bend it outward without damage using a channel lock on the supporting galvanized brace which runs from the hinge to the opposite side. The excellent instructional video attached to the dome part on etrailer's digital shopping catalogue was very helpful. I changed the screen too. I was able to find an older style screen on the Walmart website which did not require me to drill a new hole for the crank handle as demonstrated in the instructional video on the etrailer.com site. At half the price as etrailer's screen and double the shipping cost from Walmart, cost for replacing my vent dome was a horse apiece. Thanks etrailer. I'm very happy.

Product worked but wasn't worth the price paid. Ordered the white version which was cheaper and combined with other items for free shipping. Ordered 11/23; Kept changing the delivery till July 2024. You offered the black vents. Charged the higher price and also charged me freight. Turned me off as a customer by bait and switch. Forced me to find a better source for components.

Excellent product and easy to work with. Great service. I was concerned however about insects entering through the vents so came up with a filtration system. Used a PVC coupling and some filter material. Cut the coupling to 1/2 inch rings and remove just enough material to allow an inside press fit. Cut round filter and insert first then hold in place with the ring. On the outside vent cut a long narrow piece as shown. When installed as shown, adds very good double filter and allows air to move freely. Just finished a 6000 mile trip clear across the country and back and filter performed perfectly. Eliminating the heat build up AND keeping the bugs out. JIM : ]

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

We attached the roof vent to our John Deere Gator and with it open the air flow increases significantly and keeps the inside cooler on hot days. Great product, easy to install, and we highly recommend.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I used one of the two I purchased in my 1971 W200 dodge truck its like free A/C, no not really but it helps flow air through my cab for those 9 months of stifling Florida heat an humidity. No leaks when closed. Great price. I paid 100 bucks more then a scraper paid for the truck (300) drive it almost everyday its a beater for sure but has good airflow...

Click to Enlarge

Was missing the retaining clips on both items. The old ones were ok.

What I'd like to know is how ETrailer got my Roof Vent stuff to me so quickly. Not only that, but I get a note right after I ordered referencing a prior order (for the same thing...different trailer) and I'm saying to myself, "These folks take customer service to another level." Everything ordered was in the box and delivered intact.

So far it's holding up with no leaks. Kind of on the flimsy side comparing to the one removed but easy to install. Couldn't use the trim ring inside but after a year still looks new and the lifting/lowering mechanism works smoothly. Overall a good price for the quality.

Purchased this because from Etrailer because they state made in USA. Nowhere is there a made in USA stamp or in print. It looks identical to the made in China ones for $[XX] cheaper on [online resale]. By the build quality I am quite sure that it is Disappointed to say the least

Worked great to replace the weather worn original.

Very happy with this cover. It was easy to install after viewing the video. I installed it on an old camper trailer I have.

Click to Enlarge

Click to Enlarge

Click to Enlarge

This purchase was a replacement for the exact vent that I purchased in 2020. Originally I gave this product a high rating. One year later as requested I updated my review noting the plastic had turned yellow, the locking tabs for the vent door required a ladder to operate and the vent flap was annoying as, unless it was locked, would clatter in the slightest breeze. This month 2023 I was washing the rv in preparation for a trip and I hit the center of the vent hood with a wash brush. The center "reinforcing" post broke off and the vent hood cracked. The plastic was not only yellow but now was also quite brittle. This is the third vent for the rv. The original 2006 Ventline lasted until 2020. The second 3 years. I purchased another as I was about to go on a trip and knew the replacement would be a no hassle install. etrailer expedited the shipment and generously waived shipping fees in consideration of the previous replacements short life span. I greatly appreciate their high quality customer service. The vent that I just received is, as other reviewers have noted, constructed of thin material and was apparently not trimmed after being removed from the mold. I will shop around before replacing with another Dexter Ventline again.

Click to Enlarge

This worked well on our airstream. Just needed aluminum paint for plastic.