# 1
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
PERFECT FIT AND FAST...... i ordered a draw-tite class ll trailer hitch, t-one wiring harness and drawbar for my 2000 toyota camry..i had planned to have someone install it, but after seeing the instructions i did it myself in 30 minutes. great products.
2012 Toyota CamryGot a very good price on a trailer hitch for my '95 Camry. It was fairly simple to install (after watching etrailer.coms video). I use it to haul around my little utility trailer (Harbor Freight) and my 12 ft kayak (BassPro).
# 2
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
My Iowa 2009 Camry has been in a garage it's whole life, so, that helped a lot. Used [online] etrailer video for ease of work. I took longer than they did as I had to work a bit to de-rust a couple of female bolt threads enough to get a bolt on easily.
Toyota CamryWe bought this 1.25" reciver hitch last year to accommodate a Kuat bike rack. The install was easy, the mounting holes lined up perfectly on our Camry, and the black painted hitch finish still looks new. We are very happy with this purchase.
# 3
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
I didn't cut off any underbody panel pieces. I just made a slit for the hitch to slide through. Also didn't cut off any heat shield. I drilled a hole for the 1/2" screw and torqued it to xx ftlb as instructed. Every thing worked fine. Hard to believe the video instructed to cut off that much. A bit crazy IMO. Also.. super snug fit. So snug I had trouble getting the M12 bolts to line up with the thread in the subframe. Pain the ass, but eventually got it in.
Fast delivery and everything fit perfect. Easy installation after watching etrailers videos. Lowest price I found on the internet for this hitch. Thanks for the great service.
# 4
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Last Friday evening (right in the middle of October) I finally installed this Curt Trailer Hitch Receiver into my 2003 Toyota Camry. This is a Class II hitch but seems like a Class III one, very sturdy, and the installation was a success. I spend a lot of time cleaning the two holes on the driver side which were exposed to the elements for the last 18 years, and then I actually drove in three old bolts which I took off from the passenger side's muffler mount, and that was preparing for the actual installation of the hitch. I just worked by myself, as my young son is not too mechanically inclined and not interested in such a thing, so I used my own technique, just tied a pleated electrical cable (3/16" diam) to the rear bumper and then I lifted up and suspended the hitch to around the middle part of the bumper. Then I screwed in one bold on passenger end first, then tightening then cable, the screwed in a bolt into the middle hole on the driver side. I used two more bolts on the passenger side, and one more on the driver side. But I have an extra hole on the driver side so I reused one old bolt for the previously never-exposed hole and then tightening all bolts properly. Then on the next day I test drive my car with this hitch and Allen bicycle carrier rack which I loaded two bikes. On thing I noticed is that the lower hanging part of the hitch around the muffler tend to hit the asphalt when came out from a parking lot due to a dip in height (difference) from sidewalk to the main road, may be I was moving a little bit fast for the shock absorber to respond sufficiently. (BTW, our bikes' tires are low in air pressure or just flat because these were not used for a very long while, since COVID-19 pandemic began, and we avoided activities at any public parks and other places, and because we live in a condominium-type of apartments, we were not as "busy bees" except to stay put in the "hive".)
2002 Toyota CamryIt was easy enough to put on following the instructions to the letter. Has held up fine and have no issues with the purchase.
# 5
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Finally got the chance to install this hitch. The written instructions are marginal. They did not cover my hybrid version. The installation videos on etrailer were more helpful. The hitch was a bit off and contacts the tire well on one side. Installation by loosening the exhaust did not work for me. Mine was too tight and I could not move it out of the way to drill. I had to remove the muffler. The instructions for trimming are a bit aggressive. I was able to get the under cover installed with about 25% of the suggested cutting. One thing the instructions left out is a rear edge trim (however, the video did mention this). I also added a strip from (the heat shield scrap) to tie the cover back together and prevent flutter noise while driving. Installed, this hitch appears sturdy. I am sure it will last. Too bad it did not come with a pin or cover.
This is a quality product. It’s designed to fit the car perfectly. Please not though that you’ll need special tools to disconnect/drop the muffler system to install the hitch. I did not have tools to disconnect the muffler/exhaust hangers, so I wound up taking it to a mechanic that installed it for about $100.
# 6
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Toyota CamryNice hitch I use it for bike racks still looks good after a year mounted on a 2023 Camry XSE which sits low. I’ve only scraped it once when I was going up the steep incline in the Pittsburgh area.
I'm very pleased with the Curt Trailer Hitch Receiver-Custom Fit for my Camry. It's well made and was delivered in a timely manner. Highly recommend!
# 7
Curt Trailer Hitch Receiver with Standard Drawbar - Custom Fit - Class II - 1-1/4"
Unbelievable fast delivery and securely packaged. Great price also. I was worried about purchasing something over the internet but the trailer hitch and wiring kit arrived securely packaged so there were no scratched, dents, or issues of any kind. I can't say enough positive things about my purchases. I definitely will be back to etrailer.com for more purchases.
Trailer hitch and wiring arrived as scheduled. Product fits the Toyota Camry perfectly. Installation was easy. Excellent service.
# 8
Curt Trailer Hitch Receiver with Standard Drawbar - Custom Fit - Class II - 1-1/4"
outstanding easy and just what I needed great product and price plus the wiring I ordered went in easy as pie
A difficult installation. But, that was not because of the hitch. Once the car was apart, the hitch fit perfectly and bolted right up.
# 9
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
I purchase two different products and installed both, back to back. I did not use a jack or a lift, so it took about 45 minutes to finesse this one into/onto my Toyota Prius. I needed a helper (wife) which made it much easier. This is for a bike rack. Ordered Friday and delivered Monday, fast, fast. Thank you.
Love it! This trailer hitch allows an upright bike rack to attach, with the addition of an adapter, to our hatchback style Prius. It is much sturdier than our old bike rack that leaned against the hatch window. The trailer hitch/bike rack combo allows us to get into the hatch without removing the rack. We travelled across Florida and back, 300 miles, with no problems. Your website was very helpful in determining the proper hitch and installation was easy. Thank you for a great product at a good price.
# 10
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Very easy install and not excessively heavy to the point where it would reduce my mpg. Useful for so many purposes besides towing a trailer as well like mounting a bicycle rack or cargo carrier.
My son-in-law and I installed this hitch on a 2012 Toyota Prius V. The video for the install on a Prius is accurate for a Prius V with the exception that a Prius V does not have cosmetic cowling on the underbody that has to be removed. The install was straightforward and we had the hitch on in about 45 minutes. Other than the receiver on the hitch, you can't see the hitch without bending down and looking under the bumper. I personally like the aesthetics. We're using the hitch with the Swagman XTC-2 bike carrier and the combination is ideal for transporting our two bicycles. The fit between the hitch and bike carrier is tight and the Swagman allows us to drop the middle bar down for access to open the rear hatch of the vehicle when the bikes are not in the carrier but leaving the bike carrier attached. We bought the Prius V so we could carry passengers, gear and two bicycles on trips. The draw-tite hitch and Swagman XTC-2 give us the flexibility to do that. Here's some pictures to demonstrate as I've had a difficult time finding photos on the web showing a Prius V with hitch and bicycle carrier installed. I have a cover on the hitch receiver in some photos, sorry I took the photos at night with a flash, but hey, I did the review! Good luck. Oh, by the way, like others have written, E Trailer was on top of things from the get go and I received numerous e-mails about the status of my order and follow-up after my receipt. Only took three business days between the date of my order and delivery to my home. The hitch and bike carrier were boxed and then inserted into another heavy duty shipping box. There were a few small tears in the outer box (assume from rough handling by the delivery carrier) but the contents were not damaged in any way. I would definitely order again from etrailer.com.
# 11
Curt Trailer Hitch Receiver with Standard Drawbar - Custom Fit - Class II - 1-1/4"
These are some of the best trailer hitches I know for the Toyota camry. Easy to install. I did order the wrong ball, had to buy another, to large of a bolt size.
Quality product. Worth every penny!
# 12
Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class II - 1-1/4"
# 13
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
I couldn't beat the price on this trailer hitch. Ordering the part on the website was easy. Shipping was within the expected time of arrival. The hitch arrived well packaged at my front door. The hitch itself looks and feels quality made. Installation took me by myself about 2 hours to complete. I do advise that removing the rear bumper makes installation of the hitch A LOT easier. Overall, 5 stars all around.
Mostly easy to install on a hatchback Yaris. The upper bolts are in a tight area so you'll need a short ratchet or one with a higher tooth count since you will only have 10-20 degrees of movement on your ratchet. Everything else is fine. Good positioning and low visibility.
# 14
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Perfect fit and finish, mounts high and tight to underbody for ground clearance, well worth the the modest price, the box makes a nice pad to lay on also
2017 Toyota CorollaEasy install, great instructions, no rust or complications of any sort at 1 year. Whole system including bolts and washers look almost new after 40,000 miles and frequent use
What our customers are saying:
"Well I got the hitch in and mounted on the truck, it fit as if it was made for the toyota. thanks a lot for your service, you have my orders from now-on."