Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the front of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
Installation Notes:
Designed for models with Dual Rear Wheels only.
More Information >Videos
for Wheel Well Liner
Help Articles
for Wheel Well Liner
Expert Answers
for Wheel Well Liner
The only difference between the Dexter Electric Trailer Brake Assembly part #23-181 for right hand or part #23-180 for left hand and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly part #23-465 for right hand or part #23-464 for left hand is…
view full answer...Hi Josh; I think the B&W Companion #BWRVK3300 is the best option for your 2025 F-350. The Companion will give you a great towing experience worthy of your new truck. It has 1" thick dual jaws for a solid connection and a non-binding…
view full answer...The Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend - Aluminum Rear Wheels - Qty 2 #WM8029180 are a great option but for a little more accessibility it sounds like you'd prefer something more like the Wheel Masters 2-Hose Inflation…
view full answer...While we do carry great extenders for your dually 2016 Ford F-350, we do not carry any extenders with a single inflation point that inflates both tires simultaneously. However, we do have a great option that involve easily-accessible valves for…
view full answer...Hello Les, On the Shocker Hitch Air Shock Absorbing Gooseneck Coupler - 4" Round Tube - 30K - Bulldog Fit #SHK77MR from the very bottom to the first pin hole it is 13".
view full answer...Those look a lot like the Lynx wheels such as those found in tire and wheel combo #LHAS701. If your wheels have a 4.9 inch center hole diameter you can use #490EZ-SS, #AM90156C, #LHCS109, or #LHCS109-SI60C. If you have a different size pilot hole let…
view full answer...The Replacement Center Cap for 16" Aluminum Viking Series Wheels #CXF105B will fit a 16" diameter, 8-lug wheel with a 4.9" pilot hole. It was just designed around the 16" Aluminum Viking Series Wheels like what comes with the…
view full answer...You you will need a padlock in order to lock the B&W Companion 5th Wheel Hitch for Ford Super Duty Prep Package #BWRVK3305 or #BWRVK3300. The lock that will work is the Master Lock Padlock #ML140DLH. All you need to do is attach the padlock to…
view full answer...If you have the B&W Companion 5th wheel hitch #BWRVK3500, which is intended for installation in a square-shank B&W install kit like #BWGNRK1111-5W, then this hitch cannot be installed in the Ford OEM puck system. B&W makes a Companion…
view full answer...I can confirm for you that there is a difference between the #BWRVK3300 and the #BWRVK3305 with the construction of the base of the hitch, which is where you get the difference in capacities between the two hitches. The 3300 is only rated for…
view full answer...Hello David. I can definitely help point you in the right direction. Does your 2022 F250 have the OEM 5th wheel prep package in the bed? Post in the comments below and let me know because that will be a major deciding factor in selecting a hitch. If…
view full answer...There's three different B&W Companion 5th wheel hitches that are compatible with the Ford factory puck system in the 2024 Ford F-250 and F-350. Which one you need will be determined by what size bed you have and the weight of your 5th wheel…
view full answer...