summer hauling headquarters

GMC Yukon Towing Mirrors

Select GMC Yukon Year

  
Towing Mirrors


Available Years for GMC Yukon Towing Mirrors


Towing Mirrors

Need to extend your line of vision while towing? We offer custom-fit towing mirrors for many vehicles with a simple slip-on installation by CIPA, K Source, Longview and Original Custom Towing Mirrors. The extended mirrors offer the additional reach you need to view those hard-to-see areas on the rear and side of your trailer. Or, add a pair of OEM replacement extendable mirrors and keep your vehicle riding in style when towing and driving around town.

View the complete list of custom towing mirrors and OEM extendable mirrors we offer for your vehicle by entering the year, make, and model to the left. Don't forget to add a hot spot mirror for even more visibility!




Universal Fit Mirrors



Towing Mirror Accessories



Towing Mirror Manufacturers



GMC Yukon Custom Towing Mirrors Videos

K-Source Custom Towing Mirrors Installation - 2010 GMC Yukon

Today on this 2010 GMC Yukon, we're going to be taking a look at the k-source custom towing mirrors, the snap on versions, for the driver and passenger sides. This is part number KS80900. With your side mirror, this would be the normal view of what you could see with your trailer attached to your vehicle. Thanks to the k-source mirror, you can see this much better and have a wider field of view, so when you're making turns you make sure the trailer is following safely behind you. With our mirror installed you can see it doesn't impede the movement of your actual vehicle's mirror at all. You're free to move it however you please. Of course to adjust the mirror on the side here, you'll do that by hand.



Longview Custom Towing Mirrors Installation - 2010 GMC Yukon

Today we're going to take a look at and show you how to install, the original custom towing mirrors. These are a slide on style sold as a pair from Longview, part number is CTM1600. Here you'll see our view of our factor mirror. It works out great until we get out here to the outer region. This is where our towing mirror's going to take over and help to extend our view out here, where we can really see what's going on with our trailer. These Longview towing mirrors do a great job of making trailering a little bit easier. They're going to extend our field of view allowing us to change lanes, park, navigate around town just a little bit easier.



CIPA Custom Towing Mirrors Installation - 2010 GMC Yukon

Today on our 2010 GMC Yukon we'll be installing the CIPA Custom Towing Mirrors, part number CM10900. This is a set of mirrors for both the driver and passenger's side. Quick note, the CIPA Custom Towing Mirrors can also be purchased separately, for the driver's side or left side, it would be part number 10901. For the passenger's side or right side, it would be part number 10902. Here's what our mirror will look like once installed. The sleek and stylish design will fit tight around the manufacturer's mirror and really hold it in place to prevent vibration and movement at highway speeds.



K-Source Custom Towing Mirrors Installation - 2007 GMC Yukon

Today on our 2007 GMC Yukon we'll be installing part number KS80900. This is a K-Source Custom Towing Mirrors. They are a snap-on for both the driver and passenger side. This is going to be a very easy install. We're going to take our driver's side mirror here and place the top hooks around the top of our car's factory mirror. We'll go ahead and pull it down and around and snap it to the bottom.



Longview Custom Towing Mirrors Installation - 2007 GMC Yukon

Today on our 2007 GMC Yukon Denali, were going to be test fitting the Longview custom-fit towing mirrors, part number CTM1600. First, were going to take one of our flat hooks and feed it in from the back side of the shell. Then, we can take our new mirror and slip it over the OEM mirror on our Yukon. Well take the adapter and slip it over our hook and then gently thread on one of our hand knobs. Well take the other hook, and hook it to the front side of our original mirror, feed it back through the adapter and secure it with a hand knob again on the other side. Then, we can slowly adjust the hand knobs to tighten the new mirror over our factory mirror.



CIPA Custom Towing Mirrors Installation - 2007 GMC Yukon

Today on our 2007 Yukon Denali, were going to be test fitting the CIPA custom-fit towing mirrors, part number 10901 and part number 10902. Inside the box youll find the mirror, two foam pads, a block and a knob. The first foam pad we need to attach to our block. This will help protect our factory mirror from being damaged by the block. The second piece of foam tape will go here, inside of our new mirror, in this location. Now, to install the mirror, well slide it over the mirror most of the way, but we dont want to push it all the way yet.








^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.