Chrysler 300 Brake Controller

Select Vehicle Year

  
Brake Controller

Available Years for Chrysler 300 Brake Controller


Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.





Brake Controller Manufacturers


Search For Custom Fit Chrysler 300 Accessories
Select A Category Below



Chrysler 300 Brake Controller Videos

Trailer Brake Controller Installation - 2007 Chrysler 300

Today we are going to be installing Prodigy part number 90185 on a 2007 Chrysler 300. We are also going to be using the brake control wiring kit, part number ETBC7. What we are going to do is go ahead and locate a good position to mount the brake controller. We are inside the cab here, directly below the steering wheel. A good mounting location for the brake controller is typically right to the right of the steering wheel so it is within hands reach of making your adjustments. But before we go ahead and mount it I want to go ahead and locate the brake wire underneath the steering column, right above the brake pedal. This is a wire that we are going to need to tap into which is going to activate the brake controller for us. It is actually located on the brake switch and we are going to look for the wire that actually gets hot when we depress the brake pedal. There is a carpeting piece underneath here that is covering up all the wiring that is above the brake pedal. So the first thing I am going to do is to go ahead and remove that. There are two push pins: one here, and one here, that I need to remove. OK, now that we have got the carpeted piece up and out of the way, we have gone ahead and located the brake switch, which is that white box right there at the top of the brake pedal. If you follow behind that, you will locate the wiring harness that is feeding the brake switch. I went ahead and tested them and I found that the green wire with the white stripe is the wire that we are looking for that is the cold side of the brake switch - the wire that we are looking to tap into with the red wire on the brake controller. So we are going to go ahead and do that now, and then I think we will go ahead and mount the brake controller.