If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.
The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…
I can certainly point you in the right direction. Fitment of the MORryde X-factor crossmember will depend on what kind of suspension is on your trailer. This kind of detail is not listed in the Forest River online user guide, so we will need to take…
You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install…
The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…
The PD4655LIV unfortunately is no longer in production you'll need the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel #PD4655V instead. This will also simply replace the converter section of your current power center…
To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
Thanks for the pictures! To replace the converter section of your WF-8955PEC 55A power center, I recommend the Progressive Dynamics Replacement Converter for WFCO RV Power Centers item #PD4655V. This unit will fit in the same dimensions that your…
I have a solution but unfortunately we do not currently have a replacement available based off of the serial number provided. For a great replacement the Electric Jack w/ Footplate part #EJ-3520-BBX would work and work well. It had 25 1/8" of…
I do have an solution for you, however there is not a replacement motor available for your Lippert model 1817941 Electric A-Frame Trailer Jack. I recommend simply replacing the jack itself with the Lippert Electric Trailer Jack #LC285318, which is…
