I do have an option for you, but you are correct that you will need to replace your trailer hitch receiver. For the new trailer hitch receiver you will need the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLF1008-30 which has a 20000lb max…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
If your 2020 Ford F-350 has the OEM prep package you'll see 4 "pucks" and a gooseneck hitch opening in the bed (pictured below). If it doesn't have pucks then you could install the Reese Under-Bed Gooseneck Trailer Hitch w/ Custom…
Hello Cory. The difference between the two is that the Air Lift LoadLifter 5000 #AL88399 has an internal jounce bumper (bump stop), and the Air Lift LoadLifter 5000 #AL57399 does not. Both products have a 5,000 pound load leveling capacity, and are…
Hey Heather, you would need the standard MaxxAir Vent Cover part #MA00-933069 as a vent cover for the top of your Ventline E-Z Lift Ventadome as there isn't a specific one that fits the Ventadome. The MaxxAir is a universal design that will work…
Yes, they will! The Dexter Fortress Threaded Aluminum Oil Cap item #DX39CR is a replacement for Dexter's 021-036-00 cap. It fits 4" threaded hubs and is easy to access to fill or drain your axle's oil.
You are looking for the Curt Crosswing part #C92DR. This is the version of the hitch that attaches to a gooseneck ball like your OEM ball in your truck.
There basically is no difference but we have two part numbers for the Curt Crosswing depending on where we have it listed on our website. As a fifth wheel hitch it's part #C92DR or as an adapter for a gooseneck hitch ball part #C32DR.
Your Eaz-Lift 18k 5th wheel slider hitch by Camco is designed to fit industry standard fifth wheel rails like what the Demco Rail Adapter part #DM6194 provides so this would work well for you.
Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…
Both of the front mounted hitches you referenced, Draw-Tite #65076 and Curt #C31078 are confirmed fits for all models of the 2017 Ford F-250 Super Duty. They will not interfere with your axles; you can check out how each looks in the photos I've…
For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links to…
