The primary difference is a matter of numbers. When installed, the Draw-Tite Class III #76025 will sit so the inside top edge of the receiver tube sits about 13 inches above the ground, and the receiver tube will sit under the bumper so that the…
Hi Daniel; the BAJA Collection Ball Mount w/ 2" Ball and Hitch Pin - 5-1/4" Drop - 4" Rise #TS27VR is the best option for what you need. However, it won't come pre-torqued in the rise configuration so you will have to install the…
Hey Art, we can help but we don't have a ball mount that has the ball pre-installed and torqued in the configuration you are wanting. So you would want to start with a ball mount that has a 4 inch rise like the TowSmart #TS78FR and then add a 2…
Hey Mike! The Benton Shifts&Grins Bike Rack for 4 Bikes item #B82FR does not have any built in locks which is a big part of why it comes at such an affordable cost compared to other manufacturer's offerings. You can easily secure your bikes…
Hello Paul, The weight of the BulletProof Hitches Aluminum Adjustable 2-Ball Mount - 2" Hitch - 4" Drop/Rise - 14K #BPH97MR is about 17 pounds. We have the shipping weight listed as 17.803 pounds. Is that weight going to work for you? (You…
The second pin hole of the Curt ball mount part #C45240 that you referenced is 3 inches behind the first one. That means the second pin hole is 6-1/4 inches from the weld bracket.
Hey Javier, unfortunately Bulletproof does not have a combination 1 7/8" and 2" ball mount. What you could do though, is use the B&W Tow & Stow 3-Ball Mount #BWTS10048B which also has a 10k capacity, 5 1/2" of rise, 5" of…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
Yes, that is correct the Thule Hullavator Pro item #TH898 does indeed work with the 58 "Malone AirFlow2 Roof Rack item #MPG216. These mount to the raised rails on the 2016 Chevy Equinox and will give you plenty of room to use the lift assist…
Yes, you will be able to fit the Thule Force XT L #TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open…
Thank you for all of the information and the pictures! I am not sure what year Routan you had but when we installed the Draw-Tite #75579 (which replaced the 87451) on a 2009 Volkswagen Routan from the center of the hitch pin hole to the outermost…
