You will be able to mount the Rhino-Rack Batwing awning #RR33100 (driver's side mount) or #RR33200 (passenger side mount)on the FrontRunner Slimline 2 roof rack using the included hardware in the T-slots on your rack. This mounts in the same…
The Rhino-Rack Batwing Awning part #RR33200 comes with telescoping poles which can be adjusted for the desired height with the max being 7' tall. Therefore, that is then going to be around the height of the awning once installed. In regards to…
The 1/2" Bolt #337FCB050013200 will fit with the Trailer Hitch Spacer Block #RP3022, but if you're looking for replacement hardware for a trailer hitch that fits your 2012 Chrysler Town and Country, like the etrailer #e98854, then you…
From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Thanks for getting me the pictures of your Thule T2! From that I can tell you have the T2 Classic like #TH9044 and the correct wheel holder would be the part #7521568001. This would also work on the #TH9044-TH9046.
When it comes to installing a trailer hitch onto your 2023 Hyundai Palisade the only difference between The Curt Trailer Hitch #C13427 and The etrailer Hitch #e95ZR is the finish on the hitches. The Curt hitch has a glossy finish and the etrailer has…
The only difference between the Curt Trailer Hitch Receiver #C22HR and our etrailer Receiver #e27KR is the powder coat finish. They are both custom fit receivers manufactured by Curt for your 2023 Acura MDX. We selected Curt to manufacture our…
It is highly likely that you can carry 5,000 pounds on two 3,500 pound axles. The carrying capacity of two 3,500 pound axles is 7,000 pounds. The axles support not only the cargo's weight but also the weight of the trailer's frame and body.…
To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…
The suspension in general on your trailer looks very worn. I would replace as much as I could on it to get it back to good working order. The problem with the equalizer cocked to one side like that can happen sometimes. It usually fixes itself when a…
It sounds like your trailer isn't sitting totally level when hooked up to your tow vehicle. Does the front of the trailer sit higher than the rear? Judging by the angle of the equalizer in the picture you sent me it looks to be nose high. If so,…
