Custom Fit 2010 Ford F-150 Accessories

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

Rhino Rack has tracks and 65" to 70" aero bars, but not together in combination. That means you would have to order the parts separately. However, there are a couple of things you need to be aware of if you want to carry boats that wide.…

The weight capacity of the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-120B is 220 lbs and is a dynamic weight rating. That means it's the weight you could have on the bars while driving. It doesn't have a static rating but for…

Hey Matt, thanks for reaching out! Yes, the Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness #TK99UR comes with the correct adapter harness to get the controller installed on your 2010 Ford F-150.

We have a few options for your 2010 Ford F-150 that will work well with your 5,000 lb RV. I've linked the page to all your hitch options. For the strongest hitch, I recommend the Curt Trailer Hitch Receiver - Class IV - 2" #C14002 which is…

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

The length I'm seeing for your 2015 Forest River Rockwood Freedom Camper 1970 while closed is 15.25' so the correct cover for your application would be the Classic Accessories PolyPro III Deluxe RV Cover for Pop Up Campers up to 16' Long…

There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift #TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also…

When installed on a 2010 Ford F150, the Draw-Tite #75691 would be partically concealed behind the bumper. The receiver tube is the main portion that'll be visible, along with the lower portion of the hitch crossbar. The linked installation video…

The product that you asked this question from is the Draw-Tite Max-Frame Trailer Hitch Receiver part #75691. This hitch fits a 2009 - 2014 Ford F-150 without factory hitch and a 2010 - 2014 Ford F-150 Raptor without factory hitch. I have attached a…

You'll have to compare the exhaust setup you installed on your 2010 Ford F-150 to the picture I attached to see if your aftermarket exhaust will fit with the Draw Tite #75691. Our hitches like this have only be tested on vehicles that have…

I did some checking, and found that the hitch on your 2010 Ford F-150 is fully integrated into the bumper brackets so you can't just remove the existing OEM hitch and replace it with an aftermarket hitch like the Draw-Tite #75691 you'd looked…