Review of Weigh Safe Hitch Anti-Rattle Reducer Sleeve 2-1/2 To 2 Inch - WS79ZR Video

Hey Tony, yes you can use the Weigh Safe Anti-Rattle Reducer Sleeve part #WS79ZR with a weight distribution system like your Weigh Safe.

Hello Jim, thanks for reaching out. The Weigh Safe Anti-Rattle Reducer Sleeve #WS79ZR is indeed rated to be compatible with the receiver on your 2024 F-350 pulling your Mini Winnie trailer. The reducer sleeve will work with any 2-1/2" hitch to…

Hey Al, we have the Weigh Safe #WS79ZR which will take your 2.5 inch hitch down to a 2 inch hitch and comes with an anti-rattle system built into it so it would be by far your best option. How bad do you feel the movement back there when towing?

Hey Ernie, what you will need is the Weigh Safe Anti Rattle Hitch Reducer part #WS79ZR which is a hitch reducer like you are needing that comes with a built in anti-rattle device that will prevent the noise you are trying to avoid.

Yes, it will Lyle. I just went out to the warehouse and took some measurements. The oblong hole where the hitch pin inserts is 1-7/8" - 3" behind the weld where the Weigh Safe Anti-Rattle Reducer Sleeve item #WS79ZR inserts. This will…

I have another option for you, but there is not a no drill mounting bracket that has a longer clamp than the #C57202 you purchased. Instead I recommend the Curt Easy Mount Bracket #C58003 which will mount to the receiver tube of the Curt Trailer…

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

I have a solution for you, but I talked to my contact over at Air Lift about this and it really is not a cost effective solution because it would involve purchasing an additional tank and air compressor system to replace the system that is included,…

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

Hey Todd. The best way to extend your 7-way connector is to use the TorkLift Wiring Harness Extension item #TLW6021. This is essentially an extension cord for your vehicle's 7-way connector. It measures 24" long. Or you can purchase the…

The highest capacity tow bar that fits a 2" receiver is the Blue Ox Apollo Non-Binding Tow Bar item #BLU22CR. It has a 12,500 lbs capacity and is compatible with Blue Ox base plate kits without an adapter. There are adapters available to use the…

Aside from using a sleeve adapter like you have already mentioned trying there isn't a 2-1/2 inch hitch adapter available for Blue Ox tow bars. Only solution we really have would be a tow bar designed for the 2-1/2 inch hitch size from Blue Ox…