Review of the Double RV Waste Valves Video

Hey William! The LaSalle Bristol RV Waste Valves #34466ND13AAR is a direct replacement. This will bolt right up to what you have now. I attached a picture below of the waste valve where you can see the same V93B15 stamped into it just like your old…

The difference between the three Valterra Double RV Waste Valves referenced in your question has to do with their fittings, specifically their use of hubs or spigots. Basically a spigot (also referred to as the "male" fitting) will go…

The differences between the Valterra #T80, #T80C, and #T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each…

The difference is the connection the two valves make after the valves come together. The part #T81 uses a spigot connection for a permanent install and the #T80 uses a bayonet style fitting which allows for easier connection and disconnection.

Product #34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While #34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the…

You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a…

The difference between hubs and spigots in terms of RV waste valves like the part #T40A is that hubs fit over pipes and spigots fit into them instead. So it really comes down to if you have a preference but the #T40A is a spigot on both sides.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…