Replacement Front Cover for Thule Evo Raised Rail Foot Review Video

The Replacement Rail Cover #TH83DH is for the Evo Flush Rail Feet #TH710601 that you installed on your 2021 Kia Telluride. We have the Thule One-Key System Lock Cylinders #TH450600 that will help to ensure the covers stay in place as the basic…

I might have an option for you but we don't have any replacement parts for the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet part #TH66RV. If this is what you need you'd have to reach out to Thule directly. That said,…

Yes we do! You can use the Thule One-Key System Lock Cylinders #TH450400 for your Evo Raised Rail Feet #TH710401. This comes with 4 cylinders, 2 keys, and one universal change key for the installation. I have attached a review video for you to check…

I don't have a whole lot of information for you but I spoke with Thule and they informed me that the lock core will need to come out first (with change key part #853-1251) and then the lock shield part #05771 can be removed. The lock shield…

Yes, the Thule One-Key System Lock Cylinders part #TH450400 will work with the Thule Canyon XT Roof Cargo Basket part #TH859XT and allow you to secure it to your vehicle. All you will need to do is pop off the plastic covers on the mounting clamps…

The Thule Cable Lock w/ One Key System Lock #TH538XT comes with a randomized lock core so if you already have 6 cylinders that match you can just swap it out with a matching lock core if the one you receive isn't the same number as what you…

The majority of Thule Cargo Boxes you can add locks to by obtaining lock cores, the Thule One-Key System part #TH450200. However, this is not the case for every Thule Cargo Box so I would really need to know exactly what model you have in order to…

If you want to change out the Thule One-Key System locks and cylinders to have the same key number as you currently have you would need to order specific lock cylinders with that key number. For example, if you have key N170 you would need the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…