Hands-On with the K-Source Snap & Zap Custom Towing Mirrors-KS80740 Video

The distance from the hitch pin hole to the center of the hitch ball of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR that you referenced is 13-1/4 inches.

The Curt Rebellion XD part #C57UR measures 10 inches from the bottom of the shank that inserts into the hitch opening to the bottom of the ball mount. So you would lose 10 inches of ground clearance measured from bottom of your hitch.

Hey Edward, thanks for reaching out! I recommend using the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR as-is because adding the RockerBall will just add more potential for uncontrolled movement as they might work against each…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 20K #C57UR is going to help dampen the jerking, jarring, bumps, vibrations, chucking, and rattling you may be experiencing but isn't going to evenly…

The Curt Rebellion XD Shock Absorbing Ball Mount #C83WR is compatible with Rock Tamers, but the only way to make sure you will have enough clearance is to measure from the center of the hitch pin hole to the front edge of your trailer hitch receiver.…

I have another option for you, but the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR you were looking at is unfortunately not compatible with a weight distribution hitch. Instead I recommend the Gen-Y Torsion Weight Distribution…

I am happy to help with the parts needed to make your vehicle and trailer compatible with electric trailer brakes. Though you don't need a 12V hot lead wire to keep a trailer battery charged, the easiest way to wire up your 2015 Jeep Wrangler and…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Larry, The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR is not going to be compatible with the head of the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37120ET so you will need to use the Equal-i-zer shank.…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…