Tube Step Specs:
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.
Installation Notes:
While most applications are No Drill, some vehicles may not have all of the factory mounting holes and may require drilling
More Information >Tube Step Specs:
Features:
These custom-fit award-winning nerf bars feature a notched bar design. The step pads are wider than on competitors' nerf bars and their die-stamped design provides strong traction. Steel construction with a textured black finish.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Easily hoist yourself into your vehicle with these straight-style, extra-wide oval step bars. 5" Wide non-slip pads provide grip, and textured black powder coated steel resists rust while adding rugged style. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
Easily hoist yourself into your vehicle with these straight-style, extra-wide oval step bars. 5" Wide non-slip pads provide grip, and textured black powder coated steel resists rust while adding rugged style. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread…
view full answer...The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is…
view full answer...