Tube Step Specs:
Features:
These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with chrome powder coat finish. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Made of rustproof stainless steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.
Installation Notes:
No drilling required for installation
Designed for models with 6-1/2' bed only
More Information >Tube Step Specs:
Features:
Made of rustproof stainless steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.
Installation Notes:
No drilling required for installation
Designed for models with 6-1/2' bed only
More Information >Tube Step Specs:
Features:
Made of rustproof stainless steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.
Installation Notes:
Drilling required for installation
Designed for models with 8' bed only
More Information >Tube Step Specs:
Features:
The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with chrome powder coat finish. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with chrome powder coat finish. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
Excludes Daytona, Rumble Bee and SRT-10 models
Excludes cab and chassis (regular cab)
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact…
view full answer...Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for…
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a…
view full answer...