2012 Ford Explorer Nerf Bars - Running Boards

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Does not fit on vehicles with power retracting boards

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

Drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Tech Tip:

Drilling is required on the pinch weld, not on the vehicle frame.

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Does not fit on vehicles with power retracting boards

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Does not fit on vehicles with power retracting boards

Features:

These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with black stainless steel trim. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of stainless steel with a polished finish that resists chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.

Installation Notes:

No drilling required for installation

Features:

These straight-style, extra-wide step bars give your vehicle a rugged look. The oval, black powder coated steel bars have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Mounting kit is included.

Installation Notes:

No drilling required for installation

Features:

These straight-style, extra-wide step bars give your vehicle a rugged look. The oval, polished stainless steel bars have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Mounting kit is included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Features:

These rustproof aluminum running boards with sleek tapered ends sit close to your vehicle for a streamlined look. A 5" Wide step area is dotted with slip-resistant rubber grommets for superior traction. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

These rustproof aluminum running boards with sleek tapered ends sit close to your vehicle for a streamlined look. A 5" wide step area is dotted with slip-resistant rubber grommets for superior traction. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.

Installation Notes:

No drilling required for installation

Features:

These rustproof aluminum running boards with sleek tapered ends sit close to your vehicle for a streamlined look. A 5" Wide step area is dotted with slip-resistant rubber grommets for superior traction. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Does not fit on vehicles with power retracting boards

Does not fit with OE skirt cladding

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Does not fit on vehicles with power retracting boards

Does not fit with OE skirt cladding

Features:

These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with polished stainless steel trim. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

Drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Tech Tip:

Drilling is required on the pinch weld, not on the vehicle frame.