Trunk Bike Racks Specs:
Features:
...Prevent bike-to-bike and bike-to-car contact Won't scratch or scuff your bike's finish Individually adjustable, arched arms support bikes and provide level transport Allow bikes to hang at di...
Installation Notes:
The flat part of the foot must sit against the vertical surface of the trunk and the toe rests within one inch of the bumper
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...Trunk bike rack carries 2 bikes using the rear of your vehicle Easy-to-use Fit Dial system adjusts rack base to fit your vehicle Installs with 6 attachment straps Dual support arms provide...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
This sleek and sturdy trunk-mounted rack lets you carry 3 bikes on your sedan, hatchback, or van. It has all the great features of the Bones and adds a strap management system and an expanded, arched base with dog legs that fit over large spoilers.
Installation Notes:
The flat part of the foot must sit against the vertical surface of the trunk and the toe rests within one inch of the bumper
Do not open trunk while rack is installed
Tech Tip:
2 bike/ 70 lb load limit. Bikes must be located in positions closest to the vehicle
More Information >Trunk Bike Racks Specs:
Features:
...the number for your vehicle, press the levers, and rotate the frame into position Adjustable arms help to keep bikes level during transport Rotate upward for added ground clearance and fold down when...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 2 bikes on your vehicle's trunk 2 Padded arms with cradle indentions and padded straps secure bikes by the frame Adjust independently to keep b...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded, anti-sway cradles and rubber straps secure bikes by the fra...
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Arched body fits over most types of spoilers 2 Padded arms with cradle indentions and padded straps secure b...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded cradles and rubber straps secure bikes by the frame 2 Quick-rel...
More Information >Trunk Bike Racks Specs:
Features:
...the number for your vehicle, press the levers, and rotate the frame into position Adjustable arms help to keep bikes level during transport Rotate upward for added ground clearance and fold down when...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Prevent bike-to-bike and bike-to-car contact Won't scratch or scuff your bike's finish Individually adjustable, arched arms support bikes and provide level transport Allow bikes to hang at di...
Installation Notes:
The flat part of the foot must sit against the vertical surface of the trunk and the toe rests within one inch of the bumper
Do not open trunk while rack is installed
Tech Tip:
2 bike/ 70 lb load limit. Bikes must be located in positions closest to the vehicle
More Information >Trunk Bike Racks Specs:
Features:
...anti-sway cradles Prevent bike-to-bike and bike-to-vehicle contact with No-Sway Cage accessories Include rubber straps to secure bikes in place Dual support arms Provide stability for bikes Fold down when...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 2 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded cradles and rubber straps secure bikes by the frame 2 Quick-rel...
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry 2 bikes on the back of your vehicle Expanded, arched base with dog leg fits over most sedan, hatchback, and SUV spoilers Arched arms separate bikes...
More Information >Trunk Bike Racks Specs:
Features:
...when straps are tight Hooks in bottom legs let you open trunk with the rack installed Rubber foot pads adjust to the shape of your trunk and protect vehicle from damage One-Key System locks in knobs...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Videos
for Trunk Bike Racks
Help Articles
for Trunk Bike Racks
Expert Answers
for Trunk Bike Racks
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the…
view full answer...The Montague Paratrooper Highline part #HIGHLINE20 is a 20 speed bike with 27.5 inch wheels whereas the Montague Paratrooper Pro part #PROBLK16 is a 27 speed bike with 26 inch wheels and has a rack over the rear wheel. So they are pretty similar…
view full answer...We only carry one trunk mounted bike rack that will fit your 2018 Honda Civic Hatchback. Take a look at the Saris Bones EX 2-bike Rack #SAR83FR. This 2-bike trunk rack has an arched dog leg that fits over the spoiler on most sedans, hatchbacks, and…
view full answer...To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a…
view full answer...Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your…
view full answer...I have a great demonstration video that shows exactly what to do! Our expert Jon walks you through how to turn the bottom hooks of the FullBack 2 #Y02634 into the…
view full answer...I do have a bike rack to fit your vehicle. Unfortunately, it will not be a hitch bike rack. I took a look at the owner's manual for…
view full answer...While both fit your 2020 Toyota Prius, the biggest differences between the Saris Bones 2 Bike Rack #SA805BL and Saris Bones EX 2 Bike Rack #SAR83FR is the latter has an added top anchor leg for more stable mounting, as well as strap management so…
view full answer...Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587…
view full answer...For your 2024 Toyota Corolla I recommend the Yakima Fullback 2 #Y02634. The adjustable arms will allow a secure fit to the back of your car. The rubber and foam pads will help to protect the paint from scratching/scuffing. The rack itself has a 35…
view full answer...Yes, there is indeed a trailer hitch that fits your 2023 Honda Accord – both the hybrid and non-hybrid models – at the following part number: - Draw-Tite Sportframe Trailer Hitch Receiver #DT86PR
view full answer...