2010 Toyota Transmission Cooler

Change Make

Select Vehicle Model

--Select Model-- 4Runner Camry FJ Cruiser Highlander Land Cruiser Prius RAV4 Sienna Tacoma Tundra

   Go

Available Models for 2010 Toyota Transmission Cooler

4Runner

Camry

FJ Cruiser

Highlander

Land Cruiser

Prius

RAV4

Sienna

Tacoma

Tundra

Vehicle Transmission Coolers

Enter the year, make and model of your vehicle above to find custom fit transmission coolers. You can also browse the different types of coolers, parts and accessories available below.

Vehicle Coolers and Parts

Engine Oil Coolers

Power Steering Cooler

Transmission Coolers

Differential Cover

Fittings

Transmission Cooler Accessories and Parts

2010 Toyota Accessories

Towing

2010 Toyota Trailer Hitch

2010 Toyota Trailer Wiring

2010 Toyota Brake Controller

2010 Toyota Fifth Wheel Hitch

2010 Toyota Gooseneck Hitch

2010 Toyota Front Mount Hitch

2010 Toyota Towing Mirrors

2010 Toyota Base Plate for Tow Bar

2010 Toyota Vehicle Tow Bar Brake System

2010 Toyota Vehicle Tow Bar Wiring

Cargo Control

2010 Toyota Roof Rack

2010 Toyota Tool Box

2010 Toyota Ladder Rack

2010 Toyota Tailgate

2010 Toyota Truck Bed Extender

2010 Toyota Trunk Bike Rack

2010 Toyota Vehicle Cargo Control

2010 Toyota Headache Rack

2010 Toyota Truck Bed Sliding Tray

2010 Toyota Camper Tie-Downs

2010 Toyota Truck Bed Bike Rack

2010 Toyota Spare Tire Bike Racks

Performance Accessories

2010 Toyota Cold Air Intake

2010 Toyota Air Filter

2010 Toyota Exhaust

2010 Toyota Suspension Enhancement

2010 Toyota Transmission Cooler

2010 Toyota Performance Chip Tuners

2010 Toyota Vehicle Lights

2010 Toyota Tire Chains

2010 Toyota Throttle Body Spacer

2010 Toyota Fluid Filters

2010 Toyota Vehicle Sway Bars

2010 Toyota Catalytic Converters

2010 Toyota Vehicle Snow Plows

2010 Toyota Vehicle Engine Heaters

2010 Toyota Off Road Lights

2010 Toyota Radiator Fan

2010 Toyota Cabin Air Filter

Vehicle Trim

2010 Toyota Floor Mats

2010 Toyota Tonneau Cover

2010 Toyota Nerf Bars - Running Boards

2010 Toyota Trim Kits

2010 Toyota Vehicle Covers

2010 Toyota Grille

2010 Toyota Grille Guard

2010 Toyota Bug Shield

2010 Toyota Side Window Vents

2010 Toyota Truck Bed Mat

2010 Toyota Bumpers

2010 Toyota Mud Flaps

2010 Toyota Lamp Guards

2010 Toyota Truck Tailgate Lock

2010 Toyota Truck Bed Rail Caps

2010 Toyota Vehicle Tent

2010 Toyota Vehicle Seat Covers

2010 Toyota Replacement Mirrors

2010 Toyota Windshield Wiper Blades

2010 Toyota Windshield Covers

2010 Toyota Vehicle Air Mattress

2010 Toyota Tailgate Lift

2010 Toyota Questions and Answers

• FastWay e2 Weight Distribution System Recommendation for R-Pod Camper with 300 lbs Tongue Weight
  
• For your tongue weight of 300 lbs the FastWay E2 Weight Distribution System part # FA92-00-0450 that you referenced would be a great option that would be rated perfectly for it. For a hitch ball you then would want the part # 40038.
  view full answer...


• Recommended Timbren Rear Suspension Enhancement for a 2010 Toyota Tacoma With 4WD
  
• There are a few different options that we have for you to install a Timbren Rear Suspension Enhancement System on your 2010 Toyota Tacoma that is 4WD. Please keep in mind that any suspension enhancement system will not increase your weight capacity. It is meant to supplement a suspension system that is in good working order. You should never exceed the weight-carrying capacity of your vehicle. If you plan on driving places that might not have a road then I recommend going with the Timbren...
  view full answer...


• Which 2 Trailer Hitch Has the Most Ground Clearance on a 2010 Toyota Sienna XLE
  
• We currently have two different 2" trailer hitch receivers for your 2010 Toyota Sienna XLE which are the Curt Trailer Hitch Receiver part # C13105 and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75237. When we tested the Curt hitch on a 2010 Toyota Sienna LE we found that the distance from the ground to the top of the inside edge on the trailer hitch receiver is 11-1/4". When we tested the Draw-Tite hitch on that very same 2010 Toyota Sienna LE we found that the distance from...
  view full answer...


• Replacement Parts Available for the Firestone Ride-Rite Air Helper Springs Part # F2445
  
• The correct replacement lower bracket for the Firestone Ride-Rite Air Helper Springs part # F2445 is the Replacement Lower Bracket part # F2135825543. You will need two lower brackets, one for each side. If all you have is the upper brackets and airbags, then you will also need the following items which I have listed for you below that will complete the kit you need for your 2010 Toyota Tundra. Extension Bracket: part # F2135825584 (1) 1/2" Bracket Strap: part # F5086 (4) 18' Air...
  view full answer...


• Adding Air Compressor for Air Bags and to Inflate Tires on 2010 Toyota Sequoia w/Air Lift Air Bags
  
• The Air Lift WirelessONE Compressor System # AL25870 doesn't have the necessary oomph (to use a technical term) or components to handle inflating vehicle tires but there are other systems that are rated for this. Basically you will be looking at compressor systems that also have an air tank and that come with an inflation hose (so you wouldn't have to add an extension). Below is a list of options that you can use for your application: # AL25690 # AL25572 # F2168 # F2549 # F2266 #...
  view full answer...


• Recommended Trailer Battery Charging System for Enclosed Motorcycle Trailer for Tools and Mattress
  
• You can absolutely use a battery in your trailer to do all the things you desire. You will simply want to get a deep cycle battery and get the amp hour rating you desire. The CTEK D250S Dual Battery Charger 12V- 20a, 5 step, Heavy Duty# CTEK40186 along with the discontinued CTEK SmartPass Energy Management Unit for CTEK D250S DUAL Battery Charger CTEK56676 are a great combination for that as the D250S alone will not work well on the high-capacity deep cell batteries. Instead...
  view full answer...


• Best Option to Carry 3 Bikes On 2010 Toyota Prius
  
• Out of all of the trunk mounted bike racks we have, the Thule Raceway PRO 3-Bike Rack # TH9002PRO is the least likely to damage your vehicle while in transport. If I had a bike I would put this unit on my car based my experience with this product and based on customer interactions. The Raceway features sleeves and pads to protect the trunk area. The Sure-Tight cables and hooks are coated with durable nylon, and the cables have movable sleeves that help protect your Toyota Prius paint...
  view full answer...


• Can Fulton Drop-Leg Stabilizer Jack with Mounting Channel be Welded to an Aluminum Frame
  
• The biggest issue you will run into is the actual welding process. There are different heat requirements for aluminum components and steel components. Not that it can't be done but the welder would need to have experience welding steel to aluminum. There is also the issue of galvanic corrosion that you mentioned. Your best option is to use a couple of scissor jacks, # UF48-979002, and bolt them to the bottom of the trailer frame. This will allow you to paint, prime, or otherwise treat...
  view full answer...


• Does a 2010 Toyota Highlander With Factory Tow Package Have a Converter?
  
• Since your 2010 Toyota Highlander has the factory towing package there will be a converter and you will only need to plug in the 4-flat wiring harness # 56042. To know if it has a converter - which will come with the factory tow package - you need to call your Toyota dealer and give them your VIN. They will be able to tell you everything that came with the vehicle, including whether or not you have the tow package.
  view full answer...


• Can Rightline Roof Cargo Bag Fit on 2010 Toyota Prius with Naked Roof
  
• For installing the Rightline Gear Roof Cargo Carrier # RL100S10 that you referenced on your 2010 Toyota Prius I do have a couple suggestions. First, I would recommend the Car Clips for Rightline Rooftop Cargo Bags # RL100600. These attach to the straps of the bag and then attach to the roof of the vehicle, this doesn't require you to run straps inside your vehicle. I also recommend a protective pad, # RL100650, to protect the roof when using the bag. The dimensions of this bag...
  view full answer...


• Recommended Universal 7-Way Kit for 2010 Toyota RAV4
  
• You are exactly correct in that you can use either the Curt Installation Kit # C57186 or the Universal Installation Kit # ETBC7 to install a brake controller and fully functional 7-Way from the 4-Way you already have installed. These are both universal 7-Way kits that will work on your 2010 RAV4. Between the two kits, I actually recommend going with the # ETBC7. This is because unlike the Curt Kit, this will include a circuit tester to help with installation, along with a bracket to...
  view full answer...


• How to Convert Yakima Holdup For 2 inch Hitch to Fit 1-1/4 inch Hitch
  
• To convert a Yakima Holdup bike rack designed for a 2 inch hitch to fit a 1-1/4 inch hitch you'd want the part # 8880581 and you'd be set.
  view full answer...


• Recommended Storage Cover for a 2018 Forest River Rpod 180
  
• As long as the RV cover exceeds the dimensions of your 2018 Forest River Rpod 180 (20' long x 8' wide x 9-1/2' tall) then it will likely work well for you. However, the Classic Accessories PolyPRO 3 R-Pod Trailer Cover part # CA80-197-171001-00 is specifically designed for Rpod 180 campers therefore this is the cover I recommend. As long as the quick-disconnect port on your Rpod is a 1/4" diameter female fitting and the female fitting on your Weber Q1200 is a 1"-20, then yes the MB Sturgis...
  view full answer...


• Wiring for Curt Echo Mobile Wireless Brake Controller and Adding Electric Brakes to a Trailer
  
• The Curt Echo Brake Controller part # C51180 is a great choice because of its convenient and simple installation. The 7-way connector that you mention part # A10-7084VP pugs into the 4-way connector you purchased part # C56217. The white wire from the 7-way plug needs to be grounded to a clean bare metal surface on the vehicle's frame. You are correct, the black wire from the 7-way connector needs to be extended from the plug into the engine cavity and to a 40 amp circuit part # 9510...
  view full answer...


• Recommended Trailer Hitch Receiver and Bike Rack for 2010 Toyota Corolla S
  
• For your 2010 Toyota Corolla S, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24913 which is a confirmed fit. With this hitch, I recommend the Swagman XC 2-Bike Rack Platform Style # S64650. To secure your bikes and the rack, I also recommend the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4" & Combo Shanks - 7' # S64031. This combination will safely transport your bikes with no vehicle body contact.
  view full answer...


• Draw-Tite Trailer Hitch and Swagman Bike Rack Compatibility with 2010 Toyota Prius
  
• The Draw-Tite # 24847 will sit below the bumper of your 2010 Toyota Prius, where the Draw-Tite # 24967 will have a hidden crosstube. I've attached a photo for comparison. They are equally easy to install and have the same capacity ratings. The 13 inch measurement from the ground to the top inside of the receiver you mentioned means you will have about 11-1/2 inches of clearance from the bottom of the chain loops to the ground. You are correct that the receiver will stick out about...
  view full answer...


• Installing a 7-Way Trailer Connector on a 2010 Toyota Highlander with a Factory 4-Way Connector
  
• We do have the parts to install a 7-way trailer connector on your 2010 Toyota Highlander but there isn't a plug and play option available if you need it to be fully functioning. If you just want the same light functions that are currently on your 4-way to be active on the 7-way then you can convert it using part # 37185. It plugs into your 4-way and has the extra wires for the extra functions but if you don't need them then can be capped off. If you do want the 7-way to be completely...
  view full answer...


• Recommended Roof Rack and Carrier for 16 Foot Canoe on 2010 Toyota Prius
  
• In order to secure a canoe to your 2010 Toyota Prius, you will need to start with a roof rack system. For your Prius, I recommend the Inno Square Roof Rack System, which consists of # INB127 for the two 50 inch Square Crossbars, # INSUT for the Inno Feet, and # INK865 for the Custom Fit Kit. This is a durable, but economically priced system that will work well as attachment points for your canoe or other roof-mounted cargo. I have attached a short video demonstration on this system,...
  view full answer...


• Recommended Bike Carrier for a 2010 Toyota RAV4 with Rear Spare Tire
  
• The Thule Apex XT 2 Bike Rack part # TH9024XT most likely won't work on your 2010 Toyota RAV4 due to the rear spare tire but the Thule Roadway 2 Bike Rack part # TH912XTR should as it offers much more clearance. If you really wanted to be certain you would just need to make sure the distance from your hitch pin hole to the outside edge of the spare tire is no more than 11" but the trailer hitch receivers we have available for the RAV4 will allow room for the Roadway so yours should too...
  view full answer...


• Could Cargo Carrier Bike Rack Adapter # CC-125 Fit on 24x62 etrailer.com Cargo Carrier # E98872
  
• If you were willing to drill some holes in the floor of the 24x62 etrailer.com Cargo Carrier # E98872 that you referenced you could install the Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier # CC-125 which would then allow to carry a couple bikes. You should note this would void the warranty of the cargo carrier as you'd be permanently modifying it.
  view full answer...


• Install Harness Recommendation to Install Redarc Tow-Pro Elite Controller in 2010 Toyota 4Runner
  
• To install the Redarc Tow-Pro Elite Trailer Brake Controller # 31-EBRH-ACCV2 in your 2010 Toyota 4Runner the recommended install harness is the part # 3040-S which plugs into the port under your dash. We have bezels like the part # 331-TPSI-001 which you could use too. Most don't use these though.
  view full answer...


• Recommended Trailer Hitch Receiver and Motorcycle Carrier for a 2010 Toyota Highlander
  
• The carrier I recommend is the MaxxTow, part # MT70101, because it's aluminum making it lighter than other steel carriers. This makes it easier to mount into a trailer hitch and also takes up less of the vehicle's available tongue weight as well. This carrier is also equipped with a 41 inch long ramp to make it easier to load the bike. The hitch I recommend for your 2010 Toyota Highlander is the etrailer.com Class III, part # E98858. It's similar to the Curt, part # 13534, that's...
  view full answer...


• 4-Way to 7-Way Adapter and Brake Controller Recommendation for 2010 Toyota FJ Cruiser
  
• The kit you need to convert a 4-way to a 7-way and wire in a brake controller on your 2010 Toyota FJ Cruiser is the part # ETBC7 which comes with everything you'd need except for a brake controller. The best budget brake controller is the Tekonsha Primus IQ part # TK90160 which I attached an install video for on a similar 2011 FJ Cruiser. It's a proportional brake controller which means it senses the amount of deceleration the tow vehicle is applying and puts a similar amount of braking...
  view full answer...


• Recommendation For Brake controller For 2010 Toyota Highlander Towing 3,000-lb Single Axle Camper
  
• Based on your information, I recommend the Tekonsha Prodigy P3 Brake Controller, Item # 90195, for you 2010 Toyota Highlander Limited. It is a proportional controller with an LCD display, storable settings, 3 boost levels, runs continuous diagnostics, and is transferable between vehicles. If you do not already have a wire harness, I recommend the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector, Item # HM11141845. If you have a factory tow package, I recommend...
  view full answer...


• Replacement Tonneau Cover For The TruXedo Lo Pro QT On A 2010 Toyota Tundra
  
• In order to choose the correct replacement tonneau cover for your 2010 Toyota Tundra, I would need to know if you have the factory deck rail system or not. For vehicles without the factory deck rail system, the replacement tonneau cover for the TruXedo Lo Pro QT Soft Roll-up part # TX563701 is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover part # TX5637-CVR. For vehicles with the factory deck rail system, the replacement tonneau cover for the TruXedo Lo...
  view full answer...


• Best Motorcycle Transport System for Harley Davidson Motorcycles and Trailers
  
• The B&W Biker Bar Motorcycle Tie-Down System is a great product for any biker who needs to transport their bike for any reason. The bar quickly and easily connects to the frame of the bike and mounts securely into the tray that is mounted to the floor. There are no further tie downs or anything else needed. I've attached some videos to assist. Harley-Davidson Softail, Dyna, V-Rod # BWMC2302 Harley-Davidson Touring models like the Road Glide, Electra Glide, Street Glide # BWMC2301 Harley-Davidson...
  view full answer...


• Can a Brake Controller Install in 2010 Toyota Highlander Hybrid
  
• It's definitely possible and pretty easy to install a brake controller on your 2010 Toyota Highlander Hybrid. The easiest way is with a Curt Echo Mobile brake controller part # C51180. All this needs is a 7-way installed with active taillight circuits and a 12 volt accessory circuit active as well. It basically just plugs into a 7-way and once synced to your smart phone will operate the trailer brakes. You'll need to start with a 4-way part # 118449, which is a custom fit for your Highlander,...
  view full answer...


• Recommended Trailer Hitch Receiver for 2010 Toyota Sienna
  
• We do not have a trailer hitch receiver that goes through the bumper of your 2010 Toyota Sienna. However, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75237 does fit nicely under the bumper to give you as much ground clearance as possible. From the ground to the bottom of the receiver tube will be about 8 inches. If you are concerned about this clearance, you can use the Roadmaster Rollaway Trailer Hitch Protector # RM-050 to give that added protection...
  view full answer...


• Fifth Wheel King Pin Weight and Truck Payload Capacity
  
• The hitch pin weight of 1400 lbs you stated is so close to your payload capacity, but that is not accounting for the 5th wheel hitch and rail weights or the loaded weight with cargo added. Tunda's are notorious for having a lower payload and in this case, I can't tell you it will be fine. The payload weight is spread out over the truck bed where the 5th wheel rails are mounted to the frame directly so are more secure. Unfortunately manufacturers don't test for the 5th Wheel Hitch weight...
  view full answer...


• Replacement Spring Bar Recommendation for Draw Tite Weight Distribution System 3200
  
• For your style of Draw Tite weight distribution we have three springs bar sets that will fit and work well. We have the part # PS58439 which is for up to 550 lb of tongue weight, we have the # PS58440 which is for up to 750 lb tongue weight and we have the # PS58441 which is for up to 1,000 lbs tongue weight.
  view full answer...