2019 Jeep Wrangler Replacement Top

Hello Christopher, We do not have the bow system for your 1993 Isuzu Amigo, and that is part of the roof frame. That is required, as well as the factory hardware for a replacement soft top, so if you have that you can use the Pavement Ends Replay…

Hey Ken, Great questions, and for the best overall anti-rattle the better option is definitely the Kuat Hi-Lo Pro Hitch Extender #KU37FR. While the standard Hi-Lo #HL20B has an anti-rattle pin, it's not at the same level as the hitch cam…

In order to flat-tow a 1998-2006 Jeep Wrangler TJ with all four wheels on the ground you will need a base plate kit, tow bar, safety cables, flat-tow wiring harness, supplemental braking system, and possibly a high-low adapter. I have attached my…

Of your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender #Y01149. If you're not concerned with the looks go with the Malone Axis #MPG907. It has more…

Hey Dennis, both the blue SumoSpring kit part #SS42XR and the black part #SS62XR are 5-1/2 inches tall.

We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a…

7-way wiring colors can vary on a trailer. The #HM11141144 from your question follows the traditional SAE (See the diagram below) with red for the 12V power instead of black. The purple in this case would be the reverse lights. On the RV standard it…

The #Y01149-1150 is the the #Y01149 paired with the Height Extension for Yakima LongArm #Y01150. The Erickson Big Bed Load Extender #EM07600 you purchased has the highest capacity at 400 lbs.

One sheet of 4-1/2 foot x 10 foot drywall that is 1/2 inch thick weighs somewhere in the neighborhood of 75 lbs (give or take), and the Yakima extender has a 300 lb capacity so it can absolutely handle at least a few sheets at a time. So you can…

From the sound of your question, it sounds like you are wanting an option for both a 4-way and a 7-way to install into your 2021 Ford Bronco and do not currently have any wiring. For a plug-in 4-way harness, I recommend the T-One Vehicle Wiring…

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…