Vehicle Style: 6-1/2 Foot Bed Change
Retractable - Manual Cover Specs:
Features:
Retractable hard tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Heavy-duty aluminum panels and silicon hinges seal the bed. Cover locks every 12" along rails and retracts with a quick-release handle.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Manual Cover Specs:
Features:
Retractable tonneau with T-slot rails lets you add a ladder rack or roof rack to your vehicle. Aluminum slats and vinyl top layer offer strength and security of a hard cover with seamless look of a soft cover. Cover locks at any point along rails.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Manual Cover Specs:
Features:
Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Manual Cover Specs:
Features:
Retractable hard tonneau cover protects your cargo and truck bed from the elements. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks every 12" along the rails, and it retracts easily with a quick-release handle.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Powered Cover Specs:
Features:
Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter,…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...Your 265/70R17 size tire is around 31-1/2 inches in diameter. You want to make sure the tire cover you get is large enough and doesn't have to be stretched over the tire. I'd rather have one…
view full answer...The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
view full answer...There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…
view full answer...Yep, you're exactly right; the distance from the center of the hitch pin hole to the welded gusset is indeed four inches on the Curt Ball Mount for 2" Hitches #C45112. So if…
view full answer...